2017年6月21日星期三

Check the electric pallet truck before operation

1. On the ground of the parked vehicle, check for hydraulic oil, gear oil, electrolyte leakage.
2. Check whether the fork is cracked and bent.
3. Check the wheels for cracking, damage, or abnormal wear. Check if the wheel fasteners are loose. Check whether the rope is around the wheel.
4. Check the left and Hand Pallet Trucks with scale and the link mechanism with or without cracks, with or without cracking; action with or without interference, the corresponding movement point wear is serious.
5. Open the hood and hood, loosen the hydraulic oil filler cover, pull out the dipstick, check the oil level is between the scale. Insufficient when added.
6. Close the hood, open the battery cover, check the pressure plate is installed firmly. Whether the battery is fixed firmly and reliably. Check the poles terminal wiring is loose or damaged, otherwise it should be adjusted or replaced.
7. Press the lift button to check the fork lift. Press the drop button, check the fork down the situation, check the lifting system is abnormal sound.
8. Press the accelerator control button to observe the progress of the vehicle, and then use the thumb to move toward the inside of the body gradually press the acceleration control button to observe the vehicle running backwards.
9. Vehicle slow forward or backward operation, the handle to move forward to the vertical position or down to the horizontal position, observe the vehicle was braking.
10. Turn the handle around the left and right of the vehicle to run three times, check the steering system is normal.
11. Press the speaker to check the sound.
12. Press the emergency power switch to check if the power supply is cut off immediately.
13. Check for abnormal noise.

2017年6月15日星期四

Anti - corrosion operation of semi - electric stacker

In the process of using a balanced Electric fork over stacker, the vehicle is corroded and affects the operation process, which we least want to see. So in the usual use of the process, we can be a certain protection, has reached the effect of anti-corrosion. The following four ways, hope to help us.
Method One: At the time of the plan, the selected part structure is necessary to facilitate the implementation of protective skills
For example, the chemical pretreatment of the workpiece such as the roof to open the skills hole, pay attention to prevent the accumulation of fluid. There is the tank on the hole to be conducive to the location of the nozzle cover, and the appearance of shot peening.
Method 2: appearance plan to prevent the accumulation of water vapor and dust elements to take into account this point, we can learn the first international electric forklift plan concept, so that the electric stack of high-profile traffic, the vehicle's aesthetic progress, Function plan, and not easy to water and fouling.
Method 3: in the stack of high-car medium easy to collect the site to consider anti-corrosion operation
For example, if it is a forklift, then we can choose to open a ventilation window, to adhere to the motor cooling and ventilation, the bottom of the battery can also open the leakage hole or equipment plower.
Method 4: Protect the exposed parts of the Electric hydraulic stacker
Relatively speaking, the exposed parts are the most simple corrosive, so on this part, we especially want to protect. This requires us to add a dust cover in the exposed area, the body exposed skills holes or functional holes also need to add a waterproof plug.
The above four points is to help balance the heavy heap car anti-corrosion method, we hope to help.

2017年5月20日星期六

self propelled pallet truck with a range of lift heights

self propelled pallet truck are available in capacities up to 4000kg, with a range of lift heights up to 3.8m.

The powered stackers comes with adjustable or fixed forks as standard, with many standard extras including Platform Plate, Jib and Hook, Boom etc.

2017年5月15日星期一

Rider Pallet Truck for efficient operation

Rider Pallet Truck designed for efficient operation in smaller workshops and confined areas. Lift heights up to 130". Fixed lift table available in manual or self-propelled units. Features adjustable staddle legs, 42" long forks, on board battery pack, key lock, safety reversing switch and battery discharge indicators. Cap. (lbs) 2000 Load Center 24" Fork Width: 62" or 96" or 130" Battery Type: 1-12V/90AH Please Call for Curret Price.

2017年5月8日星期一

Roadway stacker daily maintenance and maintenance:

The daily maintenance of the stacker can be divided into inspection, lubrication, adjustment.
(1) check. Check whether the parts of the stacking machine are abnormal, deformation, damage, oil leakage, loose or screw loss, check the oil level is normal, safety protection device is normal, the detection switch with or without dust cover.
(2) lubrication. Electric fork over stacker lubrication parts, including horizontal operating mechanism, loading platform, drive mechanism and so on. The lubrication of the horizontal operating mechanism includes horizontal guide wheel, driving wheel and passive wheel. The lubrication of the loading station includes hoisting guide wheel, fork chain and fork roller bearing. The lubrication of the driving mechanism should be carried out according to the instructions.
(3) adjustment. The adjustment is mainly for the movement part, including the horizontal guide, the lifting guide wheel, the upper guide wheel, the overspeed protection device, the detection switch, the picking device and so on.

2017年5月3日星期三

Large warehouse production must not be the stacker

The ride on pallet trucks machine is driven by the traveling motor through the drive shaft to drive the wheel on the lower rail, and the vertical movement is carried out by the lifting rope through the steel wire rope, and the fork is carried out by the fork on the loading platform. Through the above-mentioned three-dimensional movement can be designated cargo cargo out or the goods into the designated cargo. The walking addresser is used to measure the horizontal walking position of the High Lifting stacker ; the lifting device is used to control the lifting position of the loading platform; the fork direction is positioned by the proximity switch. Through the photoelectric identification, as well as optical communication signal conversion, to achieve computer control, but also to achieve the stacker control cabinet manual and semi-automatic control. At the same time, the optimized speed control method is adopted to reduce the impact of decoupling and stopping of the stacker, greatly shortening the starting and stopping distance of the stacker and improving the running efficiency of the stacker.

2017年4月28日星期五

How does the stacker run in the roadway?

The Rider Pallet Truck crane runs in the roadway between the shelves and is mainly used to carry the unit cargo loaded on the pallet or in the container; the stacker can also be opened to the corresponding goods before the person presses the stacker Library asked to pick up the goods out of the library. Roadway stacking cranes by the hoisting mechanism, operating agencies, cargo desk drivers and racks and other components, stacking machine hoisting mechanism using wire rope or chain upgrade.
Large bag semi electric stacker machine features: small footprint, large working range, the maximum handling capacity of 200kg, the maximum operating range of height 2300mm, radius of rotation 1500mm, handle the maximum rotation angle of 330 °, with a smaller movement space. In the energy efficiency is significant, with the installed capacity of the machine as different models generally 4 ~ 6.5kw and the traditional palletizer usually in the 15 ~ 20KW. The use of touch screen operation to achieve man-machine dialogue, can display the production speed, the cause and location of the problem, a high degree of automation. PLC can be used to order the carton sorting stacking layer, pallet supply and discharge can be programmed into the program to control.