lectric pallet truck Manual hydraulic stacker Advantages:

  1, manual hydraulic stacker is an indispensable material handling aids, pallet lightest, most notably anyone operational.

  2, tiller shape suitable folder with plastic handle, electric pallet trucks‍ particularly comfortable to use. The operator's hand protected by a rugged protection. Can be easily manipulated by hand lifting, down and walking lever, pallet trucks to use, lightweight, safe and comfortable.

  3, torsional steel forks made from high-tensile steel channel. Tines made of round, when inserted into the tray, the tray from being damaged, so that the guide wheel fork smoothly inserted into the tray. Son

  4, sturdy lifting system that can meet most lifting hydraulic hand truck‍ requirements, according to the standard requirements of galvanizing. Pump cylinder mounted on heavy-duty protective seat, chrome plated cylinder. Low control valves and pressure relief valve to ensure safe operation and long life.

  5, wheels flexible operation, and equipped with sealed bearings, front and rear wheels made by durable nylon, rolling resistance is very small, and there are rubber, polyurethane or special tires for the election.

        6, the hydraulic system and bearings completely no maintenance, but in extreme cases, such as in a wet environment or flushing with high-pressure hoses, all bearings are lift mover‍ equipped with filling hole for refueling.

liftstar powered pallet truck Three bodies have rotary lateral stacking forklift forks,

Three bodies have rotary lateral stacking forklift forks, fork from stacking operations can be performed in the transverse direction of the vehicle up on one side or both sides of the vehicle. counter balance stackers‍ Three ways to take forward layout stacking forklift mast, fitted with fork bearing mechanism fixed to the frame the front door frame, door frame does not have a front and rear tilt function. When the job, lateral travel forks and large loads, the mast to withstand greater lateral forces, it is often a three-column type mast structure. In the middle of the installation of the lateral column wheel to control tight corner I gantry group and the gap between the carriage.

Fork carrying device using rotary lateral institutions, both fork fork frame around the vertical axis as a 180 "rotation, but also with the fork frame around the door frame carriage lateral movement, the composite action of its operations.

Three stacking forklift lifting height up to the job 12m, to make such a truck running in a narrow roadway safety, in the lower side of the block on both sides of the vehicle has wheels, and electric pallet trucks‍ shelves with groove bottom guide block to limit vehicle longitudinal axis and angular error between the longitudinal axis of the roadway does not exceed 20, and has a role in preventing the vehicle from overturning; in roadway work can have automatic guided operation.

power pallet jack Truck, Stacker performance criteria

When integrated assessment, many companies due to truck expertise and technology do not understand, and often the quality of products can not make a reasonable judgment. Rider Pallet Truck‍ In general, the quality of the van and its superior performance is often reflected in the high efficiency, low cost, high reliability, good ergonomic design, and convenient services, and many other aspects.

1, high efficiency

High efficiency does not only mean speed (driving, lifting, lowering speed), it also means that the operator time required to complete a work cycle is short, and can work in the whole time and always maintain this efficiency. Many factors can promote efficiency: low speed, such as speed, lifting and lowering speed; ergonomic design of the application, reducing the number of actions of the operation; precision operation; ergonomic design applications, maximum reduce fatigue; good vision.

2, low-cost

The total cost of the purchase and use of the van business, the annual cost of the required include: procurement costs; maintenance costs; energy costs; labor costs.

Procurement costs will be amortized to the life of the hydraulic hand truck‍ . So expensive truck will last longer leaving its purchases to reduce costs. The actual cost of maintenance and repair costs not only parts, but also to the failure rate or downtime related. Therefore, a high-quality truck, due to its low failure rate, its maintenance costs are lower. Energy costs will vary with different truck and a different power system, such as electricity, diesel, liquefied petroleum gas or gasoline. Labor costs is with the driver's number and their total monthly wages in different variations, the number of drivers will be due to the use of high efficiency and reduce truck.

3, high security

Truck safety design, the driver should be able to fully guarantee the goods and the truck itself secure. High quality truck safety design considerations tend to every detail, every possibility.

4, ergonomics

Ergonomics is a widely used in product design is to improve the operating environment, especially science, purpose is to reduce driver fatigue and increase operator comfort and other means, to maximize production efficiency.

In truck design, ergonomics reflected in all aspects: reducing driver counter balance stackers‍ fatigue operation: The unique design can reduce the driver's operation of the action, making the operation more effort; Comfort: ergonomic design allows the driver maintain a good mood, reduce operational errors; good vision: to provide good visibility for truck operation process, not only can improve efficiency, while ensuring driver safety.

electric pallet truck Forklift spill has been plagued customers use the most common problem

Forklift spill has been plagued customers use the most common problem, whether it is internal combustion forklifts, electric cars and electric forklift trucks, or hand truck, manual Stacker there leakage problem, the problem seems to be an oil spill unable to solve the problem for a long time, has been liftstar hydraulic hand truck‍ plagued by businesses and customers, but today we have to analyze those places easily spill, how will the oil spill, how to deal with.

First, the internal leakage:

Common causes forklift lifting cylinders can not afford or lifting forks and mast itself fell forward on their own fault. The reason endoleak and exclusion method:

(1) the gap between the stem and the body wear too much

Because long-term use or distribution valve dirty oil accelerated the stem and the body, such as wear and tear, damage the mating sealing surface, resulting in oil spills. If the valve stem when repairing wear light, polished chrome stem can; if the stem badly worn, replace

(2) leakage between the body

Seals fail, resulting in the leakage; valve performance when installing the O-ring damage or aging or damaged in the hydraulic effect, but also prone to internal leakage between the electric platform stacker‍ valve body.

If you need to be polished valve damage, replace the O-ring, according to the order and tighten the bolt torque requirements.

(3) safety valve spring failure

If the valve spring failure, hydraulic oil under pressure below the system requirements can be forced to leave the ball spill valve inflow tract, causing internal leakage, the system failure.

Management must be replaced when the spring, and then use the adjustment screw to adjust the spring pressure to 14 Mpa regulations. Demand at 600mm load center distance adjustment 7.5t load cargo, when goods like starting with a non-locking nut up lock, then the pressure is, the need to adjust the pressure.

(4) multi-valve lever can not be reset

If the stem can not be reset, the trench with the oil of Taoism, will produce internal leakage.

First, because the return spring stem deformation or damage, reduce spring force without giving the stem back in place, replace the spring repairs;

Second, between the body and the stem dirty, have a greater resistance to stem reduction difficult, to be clean when repairing the internal multi-valve, eliminating resistance.

(5) cone valve wear

Poppet valve to prevent reverse flow. If the cone valve wear, Rider Pallet Truck‍ oil off Mission Road lax, then make hydraulic return, the system failure. When the repair response it into the ground or replaced.

liftstar powered pallet truck drums truck start

1, drums truck start: Check to ensure that the battery is fully charged, and indicators lights. Insert the key into the lock power, clockwise, lift the emergency stop switch to start Electric Hand Pallet Jacks‍ the Stacker.

2, drums Stacker forward / backward: The Stacker control handle to his side pull, swing down an appropriate angle. (Left vertical position but not the pressure to the lowest position), then turn the two rotary switches with thumb: If this switch forward to, you Stacker forward, if this switch to turn back, the Stacker Back . Forward / reverse speed rotary switch thereby to control the size of the rotation angle, when you start small or when the surrounding space, in order to ensure safe, controlled rotation angle should be smaller, in order to slow down the speed. There are low-speed button, press the low speed limit on the handle.

3, drums Stacker fork lift: with your fingers press the control button on the handle rose painted marks, the fork rises; press the button down flag painted, the fork drop; then stop immediately after release lift.

4, beginning belly security: When Stacker back, such as body collision red belly switch, Stacker will stop immediately, and to reverse the direction of movement forward a short distance, which is mainly to prevent harm to your body being squeezed .

5, conventional parking Stacker: when you need Stacker smooth stop, loosen the thumb, rotary switch will automatically reset, this time by the controller generates a reverse current, Stacker liftstar hydraulic hand truck‍ minimum distance a further movement after a smooth stop.

6. Vehicle Charging: When the battery meter was flashing signal, that "depleted" alarm, should be promptly charged. When charging, the first electric locks closed and the key is removed from the electric lock.‍

power pallet jack internal combustion forklifts

Internal combustion forklifts are divided into ordinary internal combustion forklifts, heavy trucks, container trucks and sides of the truck.

① ordinary internal combustion liftstar ride on pallet trucks‍ forklifts

Generally use diesel, petrol, LPG or natural gas engine as power, load capacity of 1.2 to 8.0 tons, the operating channel width is generally 3.5 to 5.0 m, taking into account the emissions and noise problems, usually outdoors, workshop or other for exhaust emissions and noise do not require special places power pallet jack‍. Due to convenient refueling, it can achieve long continuous operation, and competent (such as rain) to work in harsh environments.

② Forklift Trucks

A diesel engine as power, load capacity from 10.0 to 52.0 tons, generally used for heavier cargo terminals, steel and other industries outdoor jobs.

③ Container Handler

A diesel engine as power, load capacity from 8.0 to 45.0 tons, is generally divided into empty forklift, heavy container forklift and reachstacker. Applied to container handling, such as container yard or port terminal operations.

④ Sideloader

A diesel engine as power, load capacity of 3.0 to 6.0 tons. pallet jacks‍ Without turning, with the ability to take the goods directly from the side of the fork, and therefore mainly used fork to take a long bar goods, such as wood, steel and so on.

(2) electric forklift

Electric motor powered, battery energy. Carrying capacity of 1.0 to 4.8 tons, the operating channel width is generally 3.5 to 5.0 m. Since there is no pollution, noise, it is widely used for environmental demanding conditions, such as medicine, food and other industries. Since each cell is generally about eight hours at work hydraulic hand truck‍ needs to be charged, so for multi-shift working condition with battery backup.

electric pallet truck warehouse forklift

Warehouse forklift mainly for cargo handling and warehouse forklift design. Apart from a few warehouse forklift (such as manual pallet truck) is the liftstar hydraulic hand truck‍ use of human-driven electric pallet truck, others are driven by an electric motor, because the body is compact, mobile and flexible, light weight and good environmental performance and have been widely used in the storage industry. When multi-shift operation, the motor-driven warehouse forklift battery backup needed.

① Electric Pallet Truck

Carrying capacity of 1.6 to 3.0 tons, the operating channel width is generally 2.3 to 2.8 m, fork lift height is generally around 210mm, mainly for horizontal transport and cargo handling within the warehouse. Generally there is a walk-and Stand-two operation modes, can choose according to efficiency requirements.

② electric pallet stacker forklifts

Carrying capacity of 1.0 to 1.6 tons, the operating channel width is generally 2.3 to 2.8 m, in the structure of the door frame more than electric pallet trucks, fork lift height is generally within 4.8 meters, mainly for cargo warehouse stacking and loading and unloading.

③ reach truck

Carrying capacity of 1.0 to 2.5 tons, the whole Manual drum Stacker‍ door frame can be moved forward or retracted retracted operating channel width is generally 2.7 to 3.2 m, lifting height up to about 11 meters, commonly used in the warehouse of medium height stacking, taking cargo operations.

④ electric pickers

In certain conditions (such as supermarket distribution centers), does not require a whole pallet shipments, but in accordance with the order picking up a variety of species of cargo pallets, this link is called picking. Chosen according to the height of the goods, electric order pickers pickers can be divided into low (within 2.5 m) and the high order pickers (up to 10 m).

Carrying capacity of 2.0 to 2.5 tons (low), 1.0 to 1.2 tons (in high, with cab upgrade).

⑤ low driving three stacking forklift

Usually equipped with a three-stacking head, do not need to turn the truck, fork rotation can be achieved and pick up the goods stacked on both sides of the channel width of 1.5 to 2.0 m, Electric store Positioner‍ lifting height of up to 12 meters. Truck cab can not always upgrade on the ground, taking into account the limitations of the operative field, mainly for lifting height of less than six meters working conditions.

⑥ three high stacking forklift driver

And low driving similar three-stacking forklift, driving three high stacking forklift is also equipped with a width of 1.5 to 2.0 m three stacking head, channel, lifting height of up to 14.5 meters. Its cab can be improved, the driver can clearly observe any height goods can also be picking operations. Three high stacking forklift driver in a variety of performance and efficiency are better than the low three-stacking forklift driver, so the car has been gradually replace the low three-stacking forklift driver.

⑦ electric tractor

Using a motor-driven tractor, with its towing capacity (3.0 to 25 tons), followed by pulling a few car loading cargo. Often used for transportation between the workshop or workshops electric stacker‍ bulk goods, such as automobile manufacturing warehouse to the assembly line of transportation, airport baggage.