Check the electric pallet truck before operation

1. On the ground of the parked vehicle, check for hydraulic oil, gear oil, electrolyte leakage.
2. Check whether the fork is cracked and bent.
3. Check the wheels for cracking, damage, or abnormal wear. Check if the wheel fasteners are loose. Check whether the rope is around the wheel.
4. Check the left and Hand Pallet Trucks with scale and the link mechanism with or without cracks, with or without cracking; action with or without interference, the corresponding movement point wear is serious.
5. Open the hood and hood, loosen the hydraulic oil filler cover, pull out the dipstick, check the oil level is between the scale. Insufficient when added.
6. Close the hood, open the battery cover, check the pressure plate is installed firmly. Whether the battery is fixed firmly and reliably. Check the poles terminal wiring is loose or damaged, otherwise it should be adjusted or replaced.
7. Press the lift button to check the fork lift. Press the drop button, check the fork down the situation, check the lifting system is abnormal sound.
8. Press the accelerator control button to observe the progress of the vehicle, and then use the thumb to move toward the inside of the body gradually press the acceleration control button to observe the vehicle running backwards.
9. Vehicle slow forward or backward operation, the handle to move forward to the vertical position or down to the horizontal position, observe the vehicle was braking.
10. Turn the handle around the left and right of the vehicle to run three times, check the steering system is normal.
11. Press the speaker to check the sound.
12. Press the emergency power switch to check if the power supply is cut off immediately.
13. Check for abnormal noise.