driving three high stacking power pallet jack

 driving three high stacking forklift
And low driving similar three-stacking forklift, driving three high stacking forklift is also equipped with a width of 1.5 to 2.0 meters three stacking head, channel, lifting height of up to 14.5 meters. It can enhance the cab, the driver can clearly observe any height cargo operations can also be chosen. Three high power pallet jack  driver in a shop cranes variety of performance and efficiency are better than the low three-stacking forklift driver, so the car has to drive three to progressively replace the low stacking forklift.
 electric tractor
Tractor using motor drives, using its towing capacity (3.0 to 25 tons), followed by pulling a few loading cargo car. Frequently used in the workshop or workshop between large cargo transportation, such as automobile manufacturing warehouse to the assembly line of transport, airport luggage transport.
according to the working power power pallet jack pallet jack conditions select models and configurations Select models and configurations generally proceed from the following aspects:
Job Function
Forklift basic job function is divided into levels of handling, stacking / pickup, loading / unloading, sorting. Can be determined from the initial models described above to be achieved in accordance with corporate job functions. In addition, special operations functions will affect the specific configuration of the truck, such as the handling of the rolls, iron, etc., need forklift attachments to complete the installation of special features.

Truck sales in overseas markets of high electric pallet truck growth contribution rate

In 2007, China forklift sales reached 139,000, an increase of 30%; export forklift 47,000, an increase of 78%, exports accounted for about 34% of sales; while exports incremental contribution to sales growth rate of 65%.
In 2007, global sales reached 907,000 trucks, an increase of 10%. Composition of consumption by region as follows: Europe accounted for the world truck market share of approximately 40%; followed pallet stacker by North America (USA + Canada) market, which is about 21%; Chinese market share has exceeded 11%; while Japan's share of no more than 10%; proportion to other parts of the world is close to 16%.
Our internal combustion counterbalanced forklift "internal combustion forklift trucks account for about 80 percent of sales, while global sales of electric forklift trucks accounted for more than 50%. This is because in the truck market in Europe, America, Japan, the electric forklift has become mainstream sake. due to lower our environmental shop cranes requirements, forklift jobs more frequently than the harsh operating environment and operating costs and other factors, over an extended period of China's demand will tend to use internal combustion forklift truck.
In the global truck market structure, Toyota and Linde ahead, the annual sales income over 5 billion U.S. dollars; while Ann fork and fork Hang rule the roost in the domestic truck market, the total market share of over 50%.
Market share of overseas exports accounted for in our truck is still low, highlighting the cost advantage and export tax rebates led to export impulse grounds, the next Chinese truck exports will maintain a rapid growth rate, by 2010, a CAGR of not less than 30 %. And the next three years, the annual growth rate of domestic truck sales are expected to remain above 20%, dependence on overseas markets will increase. Export sales growth has become the main propulsion.

Since the latter can be completely covered by the former features

Even if the above steps to complete the analysis, there may be several models while still satisfying the above requirements. At this requires attention to the following aspects:
① different models, different working efficiency, the number of trucks needed, the number of different drivers, will lead to a series of cost changes, see the section of this article discusses the performance evaluation on costs.
② If the stacker in warehouse Scissor Pallet Trucks operations, different models in different channel width required to enhance the ability to have differences, which will bring about changes in the layout of the warehouse, such as cargo storage volume changes.
③ models and the number of changes, fleet management and other aspects will have an impact.
④ different models in different market holdings, its after-sales support capabilities are different, for example: low driving three-car pile high and high driving three belong to the narrow channel Stacker forklift series, can be in a very narrow channel (1.5 ~ 2.0 m) to complete the stacker / forklift, pick up. But the former can not raise the cab, so poor operating perspective, the lower the efficiency. Since the latter powered pallet trucks can be completely covered by the former features, and performance is more superior, and therefore beyond 4 to 5 times the sales in the European market, the latter than the former, in China reached more than 6 times. Therefore, most of the suppliers are focused towards the development of a high driving three cars piled high, and the low three-stacking forklift driver is only used in small-tonnage, low lift height (generally less than 6 meters) of operating conditions. In the small market sales, the number of its service engineers, engineers experience, service capabilities, such as parts inventory levels will be relatively weak.

the powered pallet truck has been achieved overseas export orders for nearly two thousand units

Forklift galleries, classic shiny, concept development has attracted many people stop, exhibition warm and friendly staff and Exhibition personnel exchanges and consultations, concept development staff shortage admiring overseas customers, they Chery forklift Dikai said he Hand pallet jacks was satisfied with the product, hope to establish stable and cooperative relations, international development Chery Dikai forklift confident cooperation between the two is also full of expectations.

It is understood that, as of September 2013, the truck has been achieved overseas export orders for nearly two thousand units, compared with the same period last year to double growth platform for workers to draw on overseas channels to achieve a synchronous rise electric pallet truck globally. During the year, the truck received the intention of customers from Northern Europe, Africa, South America, South Asia and other electric pallet truck countries come to the factory to visit and discuss cooperation has laid a solid foundation for further cooperation in the international market. The "Fair" in turn bring new opportunities for the forklift overseas development.

Committed since the fall of 2011 for the first time landing "Fair" So far, the truck has five degrees exhibitors, "Fair" to witness every step of the journey overseas expansion forklifts, forklift products also witnessed "creating value for customers", and the future development of international road remains difficult and lengthy, forklifts exhibitors will be like "Fair" as adhere to the quality win, to use technology to change the world!

then the hydraulic components have been badly worn

The quality of hydraulic oil, directly affect the normal operation of the hydraulic cylinder truck, the following is a simple identification of impurities in the hydraulic oil Method:
1, sensory identification: a clear fluid metal particles in suspension, directly feel the presence of small particles when pinched with fingers twist; in the light, if reflective flash scissor pallet truck point, then the hydraulic components have been badly worn; If the tank There are a lot of metal shavings bottom of precipitation, then the main pump or motor has been badly worn?
2, heating Identification: For low viscosity hydraulic oil directly into a clean, dry test tube heating tube heating oil if found to precipitate or suspended solids, then the oil already contains mechanical impurities???
3, the filter identification: For high viscosity hydraulic oil, diluted available pure gasoline, then clean electric lift filter paper retained if found a large number of mechanical impurities (metal powder) on filter paper, then the hydraulic components have been badly worn??
4, the sound identification: If the entire hydraulic system has a larger intermittent noise and vibration, while the main pump "buzzing" sound, even rod "crawling" phenomenon, then the observed liquid fuel tank, fuel lines? export or transparent level gauge, you will find a lot of foam? This shows the hydraulic oil has been immersed in a lot of air?
5, the application Ferrography identification: Ferrography mechanical friction wear is Vice basic starting point, by means of iron spectrometer separates the hydraulic oil in the wear particles and other particles out and made of iron spectrum slices, then placed observed under a microscope or scanning electron microscope.