Electric pallet truck configuration

1. Integral motor drive system (rich in electromagnetic brakes); vertical placement of the row of walking motor, low heat work, reliable; with travel and steering function.
2. Integrated hydraulic power unit, set hoisting motor, control valve, gear pump and fuel tank pipe accessories in a smooth, reliable, energy saving, noise reduction.
3. MOS tube electronic control components, with stepless speed regulation and thermal protection and other functions.
4. High-quality, high-capacity domestic 430Ah battery, extending the continuous working hours, improve the production of work power. (According to user needs with imported batteries)
5. Four-link mechanism Economic pallet jacks, work more reliable, more concise manufacturing and simple to obtain a higher manufacturing accuracy.
6. The vehicle is equipped with a wide range of operating handrails and fixed-station anti-skid operation route, for the operator to provide more humane security protection.
7. The vehicle uses three-dimensional software for system and component planning.
8. The vehicle uses the industrial appearance plan to carry out a new appearance plan.
9. All wheels are made of polyurethane imports.

Check the electric pallet truck before operation

1. On the ground of the parked vehicle, check for hydraulic oil, gear oil, electrolyte leakage.
2. Check whether the fork is cracked and bent.
3. Check the wheels for cracking, damage, or abnormal wear. Check if the wheel fasteners are loose. Check whether the rope is around the wheel.
4. Check the left and Hand Pallet Trucks with scale and the link mechanism with or without cracks, with or without cracking; action with or without interference, the corresponding movement point wear is serious.
5. Open the hood and hood, loosen the hydraulic oil filler cover, pull out the dipstick, check the oil level is between the scale. Insufficient when added.
6. Close the hood, open the battery cover, check the pressure plate is installed firmly. Whether the battery is fixed firmly and reliably. Check the poles terminal wiring is loose or damaged, otherwise it should be adjusted or replaced.
7. Press the lift button to check the fork lift. Press the drop button, check the fork down the situation, check the lifting system is abnormal sound.
8. Press the accelerator control button to observe the progress of the vehicle, and then use the thumb to move toward the inside of the body gradually press the acceleration control button to observe the vehicle running backwards.
9. Vehicle slow forward or backward operation, the handle to move forward to the vertical position or down to the horizontal position, observe the vehicle was braking.
10. Turn the handle around the left and right of the vehicle to run three times, check the steering system is normal.
11. Press the speaker to check the sound.
12. Press the emergency power switch to check if the power supply is cut off immediately.
13. Check for abnormal noise.

Anti - corrosion operation of semi - electric stacker

In the process of using a balanced Electric fork over stacker, the vehicle is corroded and affects the operation process, which we least want to see. So in the usual use of the process, we can be a certain protection, has reached the effect of anti-corrosion. The following four ways, hope to help us.
Method One: At the time of the plan, the selected part structure is necessary to facilitate the implementation of protective skills
For example, the chemical pretreatment of the workpiece such as the roof to open the skills hole, pay attention to prevent the accumulation of fluid. There is the tank on the hole to be conducive to the location of the nozzle cover, and the appearance of shot peening.
Method 2: appearance plan to prevent the accumulation of water vapor and dust elements to take into account this point, we can learn the first international electric forklift plan concept, so that the electric stack of high-profile traffic, the vehicle's aesthetic progress, Function plan, and not easy to water and fouling.
Method 3: in the stack of high-car medium easy to collect the site to consider anti-corrosion operation
For example, if it is a forklift, then we can choose to open a ventilation window, to adhere to the motor cooling and ventilation, the bottom of the battery can also open the leakage hole or equipment plower.
Method 4: Protect the exposed parts of the Electric hydraulic stacker
Relatively speaking, the exposed parts are the most simple corrosive, so on this part, we especially want to protect. This requires us to add a dust cover in the exposed area, the body exposed skills holes or functional holes also need to add a waterproof plug.
The above four points is to help balance the heavy heap car anti-corrosion method, we hope to help.