With the improvement of China's economic development level, China's logistics industry is also a significant development, a profound impact on the development of the Electric hydraulic stacker. Especially since the city, Wuhan to Weifang logistics professional company has aroused widespread concern at home and abroad, the logistics market has become one of the hot spots. Various types of enterprises have beachhead logistics market, a large number of private, private, joint - stock, Sino - foreign joint ventures and daily increase in logistics enterprises. And in the entire logistics chain, warehousing and Electric fork over stacker machine industry is an indispensable part. China's warehousing industry after several years of development, in the number of enterprises, employment, total assets, the main business income, total profits and other aspects have achieved certain results in the increasingly modern logistics today, warehousing plays an increasingly important character of. From the perspective of the whole society, with the development of the logistics industry, the need for more and more circulation of goods, the need for faster circulation, the degree of modernization of the storage industry requirements, especially the storage environment, storage usage , The spatial distribution of the warehousing industry, warehousing facilities and equipment stacking machines have put forward higher requirements.

All-electric stacker common faults and troubleshooting methods:

All-Electric hydraulic stacker common fault is the fork can not rise to the highest, the reason is due to lack of hydraulic oil caused by this time only need to add hydraulic oil to the cylinder can be ruled out; for the fork can not rise or can not fall , This situation is due to the hydraulic oil which is caused by impurities, for the clean hydraulic oil can be; when the fork does not fall, it may be due to the cylinder piston rod deformation due to partial load, this time only need to replace the piston rod or direct Replace the entire cylinder on it.

In the summer, how can your forklift work efficiently?

High temperature and humidity environment is the high speed of electric forklift, how to correctly use the forklift, to avoid improper use and maintenance caused your economic losses.
First, the semi electric order picker of high temperature and humidity
1, high temperature engine cooling function deterioration, the temperature is too high, so that the power, the economy deteriorated.
2, the simple attack water tank "boil", the fuel supply system is blocked, the battery "loss liquid", hydraulic brake due to swelling and deformation of the leather, tire pressure followed by external temperature rise and other attacks.
3, high temperature, high humidity conditions, the electric forklift parts of the smooth oil (fat) easy to thin, smooth function decline, the formation of heavy load mechanical wear and tear increased.
4, because the temperature is high, coupled with mosquito smoking, the driver to sleep affected, so the operation of a simple presentation of energy and heat stroke appearance, is not conducive to electric forklift safety.
5, thunderstorms more climate, due to road. Loading and unloading places with water, decreased adhesion, simple side slip, affecting forklifts, personnel, cargo safety.

Forklift operation notes

1, before entering the summer, in advance to prepare, release the engine, drive axle, transmission, steering machine, etc. in the winter smooth grease, manual lift stacker, according to the provisions of the summer filling grease.
2, clean the waterway, remove the scale of the cooling system, clear the radiator heat sink. Often check the tension of the fan belt.
3, the appropriate adjustment of the generator regulator, reduce the generator charging current.
4, the operation to avoid the engine overheating, always pay attention to the instructions of the coolant thermometer reading, if the coolant temperature is too high, to adopt the cooling method. To adhere to the amount of coolant, increase the attention should be taken to avoid the formation of coolant coolant.
5, should always check the tire temperature and pressure, if necessary, should be stopped in the shade, until the tire temperature drop and then continue to operate, shall not be used to deflate or pour cold water way to cool down, to avoid the decline in tire life.
6, to always check the braking performance, in order to avoid the brake master cylinder or pump bowl aging, swelling deformation and brake fluid vaporization to form a brake failure problems.
7, adjust the battery electrolyte density, and clear the battery cover on the ventilation holes, adhere to the electrolyte higher than the partition 10-15mm, depending on the situation filled with distilled water.
8, to avoid the use of high frequency, it is recommended to use 4-6 hours after the vehicle parked in the ventilation naturally cooled about 45 minutes after use.
9, summer rain and more, it is recommended not to run the rainy day, do not wade to run. Keep the vehicle clean, use the semi-damp cloth to rub the body (not allowed to wash), the battery part to keep clean, charging the battery cover all open, keep the charging place dry and ventilated.
10, before the operation to ensure adequate sleep, adhere to the energetic. Such as the work of feeling tired, drowsy, unresponsive, etc., should immediately stop the rest, or use cold water to cheek the effort to ensure traffic safety.
11, regularly check the motor carbon brush, if the operation is abnormal, should immediately stop, seeking Zhuo a professional sales service personnel inspection.

Forklifts are an indispensable tool for the production of labor in most factories, and of course the tools are depleted. Which corrosion is the culprit of the consumption of forklifts, and now to analyze the main cause of corrosion rust in the end what
Forklift corrosion is not only related to the environment and its own structure.
Forklifts can be divided into internal combustion forklifts and electric forklifts. Most of the internal combustion forklift used in ports, docks and mining sites, the use of the environment is relatively poor, especially in the port and chemical industry, by subtropical, humid tropics, marine climate and industrial waste gas, dust combined effect, causing damage to forklift parts corrosion , Corrosion is more serious; and Electric Riding Pallet Jack are mostly used in warehouses and other indoor places, environmental changes, environmental factors caused by relatively small corrosion.
The corrosive environment generated inside the truck is such that the high temperature generated by the engine and the combustion exhaust gas generated by the engine, the acid mist caused by the battery, the leakage, the vibration during operation, the stress caused by the impact, the friction, the local damage caused by the collision, The main reason for corrosion damage of electric rider pallet truck parts.
The main mechanism of metal corrosion is the conversion of the original metal into metal oxides, resulting in structural parts or components rust, damage can not even repair and scrapped. And the aging of non-metallic materials such as paint, rubber, glass fiber and steel fiber, mainly due to the comprehensive effect of the environment, the material macromolecular structure cracking, degradation, dissolution and other physical and chemical changes, resulting in decreased appearance and performance. It can be seen that the design structure, application materials, process and protective measures of the forklift itself directly determine the corrosion resistance of the forklift