Tire crane power steering essentials

This article explains the operation of the crane tire essentials to help you better understand the device
 (1) to start the engine. Depress the grounding switch, the Tuen Latchkey screwed to "fire" position, technology down "start" button. After starting electric door lock onto the "work" position, the starter is scissor pallet truck, you should immediately release the "Start" button, the "start" button technology under time should not exceed 15s, so as not to burn out the starter motor. When a successful start at the end, you should pause for a moment (about lmln), to be the starter for the second time to stop before starting. Repeated 3 times still can not start. Should follow the engine manual inspection, troubleshooting.
     (2) No-load Preheat running. After starting the crane should be in an unloaded condition, low throttle, low speed (650 a 750r/min) 5-10min. While observing and check the following items are normal, and then only with load for 4k. Fuel temperature> 45 ℃; temperature) 55 ℃; pressure> o. 45MPa; voltage with the speed increased, following a Manual stacker 230v: engine without any exception
Vibration, sound, smell and so on.
     (3) the engine stop. Depress the pedal flameout, long stop, but also tick open Ground switch