Lifting platform technology powered pallet truck should be accompanied by the following information

When the test ambient temperature is -20 ℃ ~ 40 ℃; humidity should be less than 85 %.
4.3 Measuring instruments and measuring requirements :
Voltmeter accuracy is not less than 0.5 ;
Meter accuracy is not less than 0.5 ;
Resistance meter accuracy is not less than ± 2%;
Insulation resistance meter accuracy is not less than ± 1.5%;
RPM meter accuracy hand pallet truck is not less than 1% ± 1 word ;
Sound level not less than the accuracy of 0.1dB (A);
Hygrometer accuracy of not less than ± 2%;
Gauge the accuracy of not less than ± 7Pa;
Vernier caliper dividing the value of not more than 0.02mm;
Steel tape measure accuracy of not less than 1 ;
Steel ruler accuracy of not less than one .
4.4 Test load
Tolerance of ± 1% of the test load .
4.5 Test Project
5 Technical Data
Lifting platform technology electric pallet truck should be accompanied by the following information :
5.1.1 Product random files, including : product certification, manufacturing license that type test to prove , according to the technical specification crane safety supervision and inspection certificate qualified manufacturing , design drawings ( including the total figure , mainly due to the force structure diagram, electrical schematics, the wiring diagram electrical , hydraulic schematics , etc. ) , safety protection device type test proved , installation instructions , instructions for use.
5.1.2 installation and construction materials, including : installation inform receipt, install the unit self-test report , the installation completion and acceptance of documents.

When power pallet jack using manned aerial hydraulic drive off work

When using manned aerial hydraulic drive off work , the species is contemporary art machinery and equipment . When a small crane aerial must be used correctly to ensure safety


1 , car drivers must hold a bus driving license.
2 , plus auxiliary gearbox hydraulic pump must be off .
3, note bridges, tunnels Hand pallet jacks electric stacker headroom .
4 , the speed is generally not more than 30 km / h , the suburbs are not more than 40 km / h .
5 , the job hopper ( platform ) declined stranded personnel inside .
6 , parking location choice should be solid ground , vehicle inclination of not more than 3 °, and turn on the flashing warning .
7 , working height and wind ;
Wind 6 and below the height of 10 meters or less suitable for the job ;
The following electric pallet jack wind 5 can fit 11 to 20 meters below the height of the job ;
Wind 4 and below 21 to 30 m height suitable for the following operations.
8 , starting the pump , depress clutch , pull the hand brake , gearbox neutral gear , pulled the clutch rod hydraulic pump , the hydraulic pump is in working condition.
9 , the hydraulic pump running 2 to 5 minutes , before manipulating the handle of each action .
10 Aerial operations, should be trained and held responsible for the operating licenses for employment .

Fixed liftstar powered pallet truck platform safety inspection rules

Fixed lifting platform safety inspection rules
A range
1.1 This standard specifies the technical requirements for stationary lifting platform , inspection rules , test methods.
1.2 This standard applies to fixed installations in industrial production workshops , warehouses and other places , the vertical transport of goods to reach a certain height or fixed floor flat loading and unloading operations , and its lifting devices connected by electric pallet trucks rigid member bench , lifting height of not more than 10 meters , speed not more than 0.3m / s, using power-driven lifting platform , and in the " special Equipment directory" ( national quality pot [ 2004 ] No. 31), the type of lift lifting platform types.
1.3 This standard does not apply to lifting equipment used in a closed elevator hoistway .
Inspection 1.4 mobile lifting platform can refer to this standard .
2 Normative references
The following documents contain provisions by the standard reference in the standard terms . For dated references , subsequent amendments ( excluding corrections) or revisions do electric lift table not apply to this standard, however, are encouraged to use the latest versions of these documents in accordance with the parties to reach an agreement on this standard . For undated references, the latest versions apply to this standard.
JB 5320-2000 scissor lift safety rules
JB / T 9229.2-1999 scissor lifts technical conditions
3 Terms and definitions
3.1 Fixed lifting platform fixed elevating platforms
Permanently installed in the specified location , and the lifting device is directly connected with the work surface or elevating work platforms connected by a rigid member, hereinafter referred to as the lifting platform .
3.2 workbench work bed
Elevating work platform components to accommodate or place items.

liftstar powered pallet truck ncrease in all-electric vehicle operations

Increase in all-electric vehicle operations, minimize the use of long distances acceleration, when fully electric cars started rising after the speed increase , stabilize the accelerator pedal , such as better roads , Stacker will continue to accelerate. When Stacker need to slow down, relax the accelerator pedal , gently depress the brake pedal , which can take full advantage of deceleration energy and, if elevated all-electric vehicle with liftstar regenerative braking , the kinetic energy can be recovered during deceleration . When the vehicle ramp down, do not disconnect the all-electric vehicle drive motor circuit rises gently depress the brake pedal to make all-electric vehicles running on elevated regenerative braking , the kinetic liftstar Hand pallet jacks energy of the downstream use of the vehicle , reducing battery energy consumption. 

remain elevated all-electric vehicle driving state standards , fork forks when traveling from the ground 10-20 cm from the ground , when the all-electric car to stop rising , fell to the ground level with fork ; traveling in poor when operating under road conditions , appropriate to reduce its weight and should be increased all-electric vehicles to reduce speed . 

Todd Schoonoverliftstar powered pallet truck State Department of Labor and Industry

Washington, a 61 years old worker from a crane to go on the stage version of the slip fall, and head injuries and died. To this end, Washington State Department of Labor and Industries recommends the following measures to avoid high operating fall accidents.
Todd Schoonover Washington State Department of Labor and Industry , Eric Jalonen and Randy Clark investigated the accident . They want to ensure that all workers regardless of physical condition can be safe down from the crane. Engineering mechanical manipulation officers , rigger and maintenance personnel are most likely to fall from a height of groups.
While the drop is not necessarily fatal higher , but back and knee injuries may be caused by a lifetime , greatly reducing the quality of their life and work .
In this case , although the victim is down from the crane turntable is very difficult, but wherever workers need jobs are the same problem .
Washington fatal accident assessment and control evaluation (FACE) Committee introduced a variety of ways to prevent similar accidents released . Together these methods compiled into the following guidelines apply to all mobile cranes and other mobile mechanical manipulation officers.

the liftstar powered pallet truck connection should be no loose

Crawler is short for crawler cranes , off site is a crawler , crawler cranes by . Lifting capacity, can hoist walk. With strong lifting capacity. Disassembly trouble, suitable large factories, working in the factory .

    1 , various safety devices and various indicating instruments should be complete and reliable.
    2 , wire rope and joints should be specified.
    3 , fuel , lubricating oil , cooling water, oil, liquid , and should be sufficient .
    4, the connection should be no loose.
    5 , the crane must have stereo speakers or clear tones and other signals .
    6 , before the crane work , you should note that the crane boom slewing range should be free of obstructions .
    7 , when the heavy lifting, the feet should be placed on the driver's brake pedal , and close attention to lifting liftstar hand pallet trucks  objects , rendering lifting objects reached its peak.
    8 , hanging objects while driving should pay attention to the ground level and a solid case against skew dumping.
    9 , when walking with load , the load should not exceed 70% by weight allowed from walking the road should be a solid formation, the boom should be in front of the track , heavy liftstar hand pallet jacks  from the ground shall not exceed 0.5m, and should leash rope . Prohibited long-range load exercise .
    10 , while working at the pit side of the fuselage and the pit should maintain the necessary distance based on soil conditions , to prevent landslides.
    11 , after obtaining a driver lifting signal emitted by the signalman must be returned to its port after lifting .
    12 , when lifting heavy objects , hook wire rope should remain vertical . Hanging from the first floor 200-500mm, check to make sure the crane stability , reliability and lashing rear brake firmly , in order to continue lifting.
    13 , after the crane work , turn off the engine , put the lever in neutral position , each brake brake die, operating room closed lock .
    14 , all maintenance , repair and adjustment and lubrication work must be carried out when the engine is stopped .