Modern crane widely used way of manipulating the pilot control

Figure 3-2 pedal lever 1 and 5 are lifting Ⅱ (auxiliary winch) and rotary manipulation. Pull back the handle, lifting load; handle is in the neutral position, keeping the load does not move (if equipped with automatic brakes) or brake pedal 5 brake load; push the handle down loads. Left handle 1, the rotary table to the left turn; handle 1 in the middle position, the cut rotary power; handle a move to the right, turn the right rotary table.

Hand stacker 2 and pedals 6 Lifting Ⅰ and luffing control. Pull back the handle 2, lifting load; handle 2 in the middle position, keep the load does not move (if equipped with automatic brakes) or brake pedal six brake load; push the handle down loads. Move to the left handle 2, lifting boom; handle 2 in the neutral position, keeping the boom does not move; rightward handle 2, landing boom.

Telescopic boom control lever 3. Push handle 3, the boom extension; handle 3 is in the intermediate position, to keep the crane does not move; pull back handle 3, the boom retraction.

Generally, the handle 3 can be independent of the handle, the boom telescoping handle 1 can also be moved back and forth. In addition, with the pedal 4 (available for selection) can replace the handle 3. Forward to pedal (toes under the pressure), boom extension; pedal in the middle position, keep the boom does not move; backwards to pedal (heel under the pressure), the boom retraction. Crane should pay attention to what the engine starting
Author: China Crane News 2013-02-14 12:06

Special attention should be: diesel should run at low speed for a long time, because the engine crankshaft speed lower than the rated speed, the fuel injector atomization will deteriorate over time, will lead diesel engine does not operate properly; Secondly, prolonged low-speed operation will the lubricant viscosity.

First, the engine starting
.

The common crane cab device how to operate

Crane cab control devices generally have a reasonable layout and clear identity, and easy to manipulate. As with all operating personnel must clear the joystick or pedal or a nearby landmark, usage and operational direction to avoid misuse.

Crane cab control devices generally have a reasonable layout and clear identity, and easy to manipulate. As with all operating personnel must clear the joystick or pedal or a nearby landmark, usage and operational direction to avoid misuse.

Generally, using the joystick and foot pedal crane handling device has a general arrangement of the law. Figure 3-1 shows the basic arrangement of the crane operation, and can be added or deleted figure handle or pedal.

Figure 3-1 is a rotary handle a manipulation. Forward (away driver direction) push handle, rotary turntable to the right (or right to set the cab left home); on the right set of crane cab leftward rotation; handle cut off in the middle position rotary power. Backward (toward the direction of the driver) pulling the handle, the powered palle ttruck rotation direction.
5 of the pedal lever 2 or telescopic crane manipulation: the forward handle, elongated boom; lever in the intermediate position, to keep the boom does not move; pull the handle back, boom retraction. Pedal five available, instead of the handle 2 handle 3 Change Action: Push the handle forward and landed boom.

The handle 4 and the brake pedal 6 is a hoisting hoisting operation and braking; pull the handle back, lifting load; handle the intermediate position is set, cutting off power from the up and maintain the load does not move (if equipped with an automatic brake) or By controlling the brake pedal loads; push the handle down loads.

What Crane

Crane (Crane) is a crane is a for loop, intermittent movement of machinery. A work cycle include: extract extract means to put items from the lift, and then move to the designated place lower level items, followed by a reverse movement, so extract unit returns to original position for the next cycle. Usually by a crane hoisting mechanism (the items up and down movement), operating agencies (the lifting movement), luffing and slewing mechanism (the article for horizontal movement), plus the metal body, power units, steering control and the necessary combination of auxiliary devices. The crane is in a range of vertical and horizontal Manual stacker of goods hoisting machinery, and the intermittent movement of the crane operation cycle characteristics of the work.
Which category has several cranes
The crane is in a range of vertical and horizontal movement of goods hoisting machinery, and the intermittent movement of the crane operation cycle characteristics of the work. By Application: General cranes, construction cranes, metallurgical cranes, railway cranes, port cranes, shipbuilding cranes, deck cranes. By tectonic Category: bridge type cranes, jib type cranes, rotary crane, non-rotating cranes, stationary cranes, crane operation, operation of cranes and rail and non-rail line. Common Model: electric single and double girder, single girder, double girder gantry, cantilever, electric single girder suspension, single and double girder grab, explosion-proof single, double girder, metallurgy single, double girder, semi-gantry cranes, manual single beam, suspension, bridge machine, etc.

characteristics of the work.

The crane is in a range of vertical and horizontal movement of goods hoisting machinery, and the intermittent movement of the crane operation cycle characteristics of the work.
Which category has several cranes
The crane is in a range of vertical and horizontal movement of goods hoisting machinery, and the intermittent movement of the crane operation cycle characteristics of the work. By Application: General cranes, construction cranes, metallurgical cranes, railway cranes, port cranes, shipbuilding cranes, deck cranes. By tectonic Category: bridge type cranes, jib type cranes, rotary crane, non-rotating cranes, stationary cranes, crane operation, operation of cranes and rail and non-rail line. Common Model: electric single and double girder, single girder, double girder gantry, cantilever, electric single girder suspension, single and double girder grab, explosion-proof single, double girder, metallurgy single, double girder, scissor pallet truck gantry cranes, manual single beam, suspension, bridge machine, etc.result of improper operation of the driver, and some circuitry accident was due to a fault in itself caused.
Therefore, the relevant electrical components and electrical specifications alignments is particularly important if the quality of the product itself does not pass, it is easy to cause a failure to form a safety hazard.
How Jigging quality guaranteed products? Or to look for national testing. The relevant specifications is also very important, and if there are no standard or develop is not clear, if there is a problem and can not be repaired, we should make this as brief as possible, and a number of senior electrician advantage.

Trinity international market rise crane

Saudi Arabia was one of the staff tried to get a large lifting Saudi leasing companies to purchase Hand pallet jacks of cranes, then drew a lot of attention of international brands.
In the last in 2012, Sany Heavy Industry in the international market sales reached 1.1 billion yuan, an increase of 50%. Sany Heavy is the deputy general manager of international marketing from all of this witness.
Real opportunity took place in 2011, when Saudi Arabia, a Saudi employee tried to get a large lifting leasing companies to purchase hundreds of cranes, then drew a lot of attention of international brands.
Although thirty-one fame was in Saudi Arabia is not large, but decided to try to fight high-level, so make unremitting efforts, our customers finally agreed to come to Trinity Industrial Park visit.
Came, the customer immediately by Trinity shocked by the atmosphere and rigorous, but also the excellent performance of the device does not make people amazed, customers immediately added thirty sets of orders.
It was Trinity's first large international orders, after which the company has signed a big one and Trinity also strive for perfection in their products, the international order more and more.

Mainly on the structure of the maximum wind load

Lifting happened in the past few years, a lot of accidents, some stories as a result of improper operation of the driver, and some circuitry accident was due to a fault in itself caused.
Therefore, the relevant electrical components and electrical specifications alignments is particularly important if the quality of the product itself does not pass, it is easy to cause a failure to form a safety hazard.
How Jigging quality guaranteed products? Or to look for national testing. The relevant specifications is also very important, and if there are no standard or develop is not clear, if there is a problem and can not be repaired, we should make this as brief as possible, and a number of senior electrician advantage.the additional load is pallet jacks  rane machinery in the normal operating state F structure by non-recurring effects loads. Mainly on the structure of the maximum wind load, suspended materials in the wind loads on the structure of the horizontal loads. Crane mechanical deflection lateral force caused by the operation, and temperature load, snow load, technology loads, etc..
3, a special loading crane in a non-working state structure may be subject to the maximum load, or in working condition occasionally suffered adverse load, such as the installation loads, seismic loads, etc., special load capacity is good or bad is one of the factors affecting the stability of crane .
Our crane factory on every static and dynamic tests are performed to ensure the stability of small crane with load capacity of security, that you can buy construction machinery.

performance and use of cost, so the choice

Maintenance costs: Maintenance cycle, electric forklift maintenance cycle in terms of the relative internal combustion forklifts two to three times longer, usually internal combustion forklift maintenance cycle of up to 500 hours of work, and many have been able to reach electric forklift 1000 hours or more maintenance cycle. Maintenance content, electric forklift maintenance is also easy maintenance than internal combustion forklifts and more.
The time required for maintenance due to electric forklift maintenance interval period relative to internal combustion forklifts to be much longer, but the time required for each maintenance than internal combustion forklifts lot less, so that saves labor costs needed to maintain, in fact, This is a more substantive forklift downtime greatly reduced, so that the forklift for improving the efficiency of the electrics tacker benefits are difficult to calculate.
For the purposes of warehousing electric forklifts, many companies want to use, from time to familiarize yourself with its brand, performance and use of cost, so the choice, it should consider what factors?
Cost, performance, and price comparison. Look at the bar on performance, run fast, run uniform, moving up and down and stability is the basic performance electric forklift warehouse, all eligible products can meet customer needs. Many enterprise customers since the first purchase, to think that these "basic skills" is enough to meet the daily application of the. As everyone knows, battery life, charging time, service life, smooth handle operation, anti-roll, lift height and weight relationship, it is a key factor in performance. If you do not wearies, but also pay attention warehousing electric forklift turning radius in a small space, storage space is more valuable, small turning radius, the more electric fork can help you save money is to save space and money.
Speaking of performance, there is little that is genuine parts are factory, the price and supply of timeliness, immediate use, does not mean that in the future no trouble. Those who fear wondering, the performance of the original warehouse electric forklift, there is so much stress. Well, after the familiar performance, look at the price, they will not blindly map or diagram cheap brand awareness. Total Use Benefits: personnel cost savings, handling efficiency, employee satisfaction, eliminate fuel costs, environmental noise reduction, exhaust pollution abatement, as well as enhance the image of the factory, the digitized or sensual benefits, it can surly counted out . Then, in the calculated electric forklift warehouse use, maintenance and repair costs. Take practical benefits minus the actual cost, you can always use the benefits derived.。

use a diagnostic procedure to quickly find faults or modify parameter settings

 good vision: to forklift operation process provides good visibility, not only to improve efficiency, while pallet jacks driver safety.
5, easy maintenance: To consider whether the truck for easy maintenance. All parts should be easy to replace, fault diagnosis and troubleshooting faster. High quality forklift control system have been modular, can be directly connected with the laptop, use a diagnostic procedure to quickly find faults or modify parameter settings (such as speed).
Recommends that companies in the purchase of the truck before, in addition to understanding forklift price and tonnage, but should be combined with the specific conditions and business development plan, considering the strength of the truck manufacturers, reputation, service assurance, and other factors after procurement decisions. The strength of the forklift supplier in addition to providing a reliable service, but its sales staff should have the expertise to help customers complete model and configuration options stage.
Finally, forklift procurement should follow the economic, efficient two principles, and in which to seek a balance. With the logistics needs of its rapid development of technology and logistics, in the choice of equipment, we should consider long-term, so that they can meet future changes to adapt to economic development, which is to reduce investment and improve the adaptability of an effective way.

especially the Pearl River Delta and Yangtze River Delta

Chinese forklift industry how to do? Chinese more than 100 low-level handling equipment is in fact consuming production resources. Smart entrepreneurs should abandon that tradition competition recap Western industrial giants vehicle family Hand stacker. That is the path we must walk their walk.
We are pleased to see that in China's coastal areas, especially the Pearl River Delta and Yangtze River Delta. The first round of capital involved forklift service provider's action has already begun. This indicates that, in the future there will be more capital and bring excellent management experience to inject forklift industry. China forklift chaos and chaotic the situation was about to be curbed. Industry norms will herald some companies will go bankrupt, some people will be unemployed.
In the new pattern of global industrial vehicles, Chinese enterprises will face enormous pressure and the attendant challenges. China's economic growth, in fact, cover up foreign brands in China's market share quietly improved. Those who rely on low-end products and price shocks and the market share of the era will be gone forever. Undoubtedly require Chinese forklift industry practitioners alert! In the new era of the pattern, the strong stronger and the weak weaker!

It may be in the new pattern of global industrial vehicles place.

Chinese truck market will no doubt be in a very long period of time is the world's largest market. Therefore Throughout the global pattern, only bigger themselves can go out! forklift jacks industry resource integration is imperative! Only through integration, China was likely to occur in a short time excellent forklift manufacturers and service providers. It may be in the new pattern of global industrial vehicles place.
Despite China Anhui Forklift Group and Hangzhou forklift forks Group into the global top 10 ranks, but still a far cry from other giant forklift. The first global forklift Toyota and KION Group's sales revenues of nearly $ 6 billion, while the second group has four sales of over 20 billion dollars. Thus, the third group the world's top 10 finalists threshold has been raised to $ 1 billion. Therefore, Chinese enterprises need to redouble our efforts forklift!
Global Forklift Front six giant blueprint is very clear, and that is a very broad product line extension, high low-end all involved. Specializes in electric and internal combustion have good merger, sale of unprofitable businesses and closing factories in Europe in favor of emerging markets and establish their own production base. Because mastery of advanced technology and to control the global market, with more than 100 truck manufacturer China looks a puffiness.

Long Feng has the advantage of a small crane

Long Feng truck crane has the advantage
Long Feng truck crane is a type of small cranes, also approved various walks of life like small construction machinery, the following are the advantages of Long Feng crane introduction,
Long Feng crane has a car through the good, flexible, high-speed travel, traveling with the convoy formations quickly transferred to the job site can be quickly put to work on. Therefore particularly suitable for mobile, not fixed workplace hoist operation. The field produced by a professional factory assembly line, thus making the crane and the electrics tacker. Small differences in the classification lifting crane, truck crane also has weaknesses, as arranged by the overall vehicle chassis restrictions, the body is longer, turning radius, and only in the right and left sides and rear of the crane set up five legs can be maintained stability.
Crane lifting operations at the right venue, you can maximize stability.

Learn Long Feng crane load capacity

Long Feng crane has been doing small crane, truck crane and make unremitting efforts to select small crane factory must understand its load capacity, following the simple ability to tell you about the characteristics of the load.
General cranes in different situations with different load capacity, mainly divided into the basic load, the additional load, load these three kinds of special randomness;
1, the basic load is frequently the load acting on the structure, including the crane machine metal structure, operation mechanism, electrical equipment such as power and weight of the load mass and gravity mechanical lifting crane hoisting the quality of their loads.
2, the additional load is small crane machinery in the normal operating state F structure by non-recurring effects loads. Mainly on the structure of the maximum wind load, suspended materials in the wind loads on the structure of the Hand stacker loads. Crane mechanical deflection lateral force caused by the operation, and temperature load, snow load, technology loads, etc..
3, a special loading crane in a non-working state structure may be subject to the maximum load, or in working condition occasionally suffered adverse load, such as the installation loads, seismic loads, etc., special load capacity is good or bad is one of the factors affecting the stability of crane .
Our crane factory on every static and dynamic tests are performed to ensure the stability of small crane with load capacity of security, that you can buy construction machinery.

The second is to strengthen the military command system

Yili party secretary Zhang Yun, deputy governor of the state government and other leaders also successively Wan water emergency rescue command center on building specialized making instructions on the relevant departments will be included in this project Ili "protect people's livelihood and promote development" project, the applicant Yuanjiang guaranteed funding projects. The second is to strengthen the military command system, to build "integrated information platform." Since the beginning of this year, Yili actively embarked Fire Department command center on the construction of the preparatory work. The command center for the construction of Xinjiang and the country into a first-class command center earlier this year, Yili Fire Department will dispatch room for large-scale expansion of the original, the original 70 square meters of the control room for the successful transformation of the current construction of a total area of ​​200 square meters of versatile command center, invested 40 million yuan to complete the whole bureau command center renovation, anti-static flooring, the strength of electrical transformation, upgrading network equipment operation and long-term perspective, with a 40k power ups, core scissor pallet truck for the latter command center access has laid a good foundation for the hardware. To avoid the command center after completion of hardware, no software, equipment, nobody used the passive situation, Yili Fire Department and long, fully serviced with strong advance command center staff, from the grass-roots squadron handpicked four business backbone advance familiar command center after the completion of a variety of business work for the command center is completed and put into use successfully laid a solid foundation. Third, invest more than 10 million attendance for the detachment headquarters squadron equipped with a large grassroots pda mobile terminal and system developers together with updates, enhancements fire pda software applications have focused on the grassroots level commanders had a "fire command box" "pda mobile terminal communication system, "application and operation training, science and technology help troops to achieve" command flattened. "

the fire and rescue " command flattened

Since the fire and rescue corps "three" building work implemented under the program since the fire station Yili Party attaches great importance to quickly convene party meeting to study the "three" building measures, and form a unified opinion and decision-making in the global down off a fire and rescue "three" building a new climax. First, the immediate introduction of a " fire and rescue " three " construction plan" , and quickly issued to the grassroots eleven brigade , requiring a global grass-roots units in order to achieve the fire and rescue " command flattened , disposal stylized, specialization " as The overall objective , a comprehensive set off forces "three" building boom . Second, quickly set up a fire and rescue "three" construction leading group , the Council pro- military officers either the group leader , the Council Secretary , government, and after the fire department as a member of the leadership , a clear division of labor, each perform their duties and to electric pallet trucks leadership the Office is responsible for the global fire and rescue "three" building work guidance, information gathering and other specific tasks. Third, in order to fully meet the fire and rescue corps "three" building inspection work , Yili Fire Department promptly issued an exam programs, the development task promotion plan , weekly use of the video system held fire and rescue "three" phases will promote the " three " focus on the various stages of the construction work carried out careful arrangements , with the primary goal brigade signed letters of responsibility , work objectives and tasks will quantify the decomposition of the individual, to ensure timely completion of the work .
- Lean and efficient , flexible operation , quick response , and strive to build a " flattened" command system .
In an effort to build a " flattened" command system , fire department from Yili alarm scheduling information through , such as links to the existing fire and rescue command system to simplify and reform , from the traditional vertical multi-level, multi-sectoral horizontal tree structure to flat structural changes to reduce intermediate layer , shortening the command processes, building a " lean and efficient , flexible operation , quick response ," the fire and rescue command system . Meanwhile, a comprehensive series of measures to accelerate the construction of emergency rescue command center , the main measures are: First, actively seek the support of the local party committee and government . February 2010 , the establishment of Yili straight comprehensive emergency rescue command center proposal , in the Ili Zhou Renda , CPPCC sessions on the subject of the NPC deputies and CPPCC members attention，

blind in the stacking direction not control gun positions

 pay attention to security.
In the fighting process, due to incomplete combustion of organic matter , live smoke big , strong irritant , visible from small, should be fully prepared to protect frontline fire personnel safety work, to make full use of personal safety equipment to prevent burns, fainting , disorientation and so on. Meanwhile, the security officer to respond appropriately according to the scene and found special circumstances to issue timely evacuation signal.Electric pallet truck, preferably along the upwind or crosswind direction or help evacuate the best direction , this should be clear in the pre-deployment forces , unity.
( Three ) to prevent blind attack.
One who does not know the fire is not the case in depth alone , blind in the stacking direction not control gun positions . In an organized and disciplined lay under fire and rescue battle.
( Four ) do fire communications and liaison work. Stacking fire, put into force and more often need to mobilize the power of social assistance , public security, armed police involved in coordination. Therefore, to enhance communication and liaison to ensure unity of command in the scene and orderliness .
( Five ) to organize replacement fire power and good logistic support work . Stacking extinguishing a long time, commanders must be reasonable arrangements for the replacement of personnel , to ensure the effective strength of fire , to prevent secondary fires caused by force or non-renewal of casualties . To ensure that the fire duty vehicle oil, water , electricity, gas , adequate fire extinguishing agent , at any time in combat readiness . In the cold season, the officers and men to pay attention to warm , to ensure that there is hot food, a hot drink . Now comes the real estate cotton harvest season , the units should earnestly implement fire prevention responsibilities , strengthen the daily management , standardized system, in strict accordance with the relevant provisions of the reasonable stacking . The only way to be " anti-consumer integration" and take preventive measures to ensure that no major fires this winter and spring stacking accidents .

adequate fire extinguishing agent , at any time in combat readiness

 to organize replacement fire power and good logistic support work . Stacking extinguishing a long time, commanders must be reasonable arrangements for the replacement of personnel , to ensure the effective strength of fire , to prevent secondary fires caused by force or non-renewal of casualties . To ensure that the fire duty vehicle oil, water , electricity, gas , adequate fire extinguishing agent , at any time in combat readiness . In the cold season, the officers and men to pay attention to warm , to ensure that there is hot food, a hot drink . Now comes the real electric stacker cotton harvest season , the units should earnestly implement fire prevention responsibilities , strengthen the daily management , standardized system, in strict accordance with the relevant provisions of the reasonable stacking . The only way to be " anti-consumer integration" and take preventive measures to ensure that no major fires this winter and spring stacking accidents .
( Reviewed by: Fire Director Wang Yang ) "three" building Ili fire brigade to help achieve leapfrog development - Yili Fire fighting and rescue "three" building Sidelights Liyue Chun Long Mei year, Yili tightly around the fire station Corps proposed , " an integrated information platform for the carrier to achieve flatten command to fire and rescue combat operations to support and standardize stylized disposal ; an integrated emergency rescue team , based on strengthening the training of professionals ." , "three " construction of the overall goal to create a comprehensive Ili fire Tiejun as an opportunity

adjusting foot fighting force.

Stacking storage material according to the nature, scale , etc., emergency mobilization of relevant plans, fully estimate the serious consequences , strengthening the first time out , tune enough fire power.
( Two ) pay attention to security.
In the fighting process, due to incomplete combustion of organic matter , live smoke big , strong irritant , visible from small, should be fully prepared to protect frontline fire personnel safety work, to make full use of personal safety equipment to prevent burns, fainting , disorientation and so on. Meanwhile, the security officer to respond appropriately according to the scene and found special circumstances to issue timely evacuation signal. Evacuation, preferably along the upwind or crosswind direction or help evacuate the best direction , this should be clear in the pre-deployment forces , unity.
( Three ) to prevent blind scissor pallet truck.
One who does not know the fire is not the case in depth alone , blind in the stacking direction not control gun positions . In an organized and disciplined lay under fire and rescue battle.
( Four ) do fire communications and liaison work. Stacking fire, put into force and more often need to mobilize the power of social assistance , public security, armed police involved in coordination. Therefore, to enhance communication and liaison to ensure unity of command in the scene and orderliness .

fire-fighting operations requirements.

First discovered by fire people , police officers and fire scene inquiry , combined with on-site inspection stacking material , type, nature and so on. In particular, calls attention to the date of the wind direction, observation and questioning whether the high-voltage wire around through , with or without violent reaction of the material , and water and so the situation , which must be mastered before fire fighting first-hand information .
( 1 ) Electric pallet jack and protection of adjacent unburned material stacking .
First evacuation of fire in the vicinity of stacking , and then evacuate the remaining close stacking . You can borrow the plant and adjacent units forklifts, bulldozers and other mechanical handling , manual handling assistance. Spray gun with comprehensive coverage of the adjacent unburned stacking , reducing its surface temperature to prevent heat radiation or flying fire off a new fire point . After the fire in the fight to turn stacks of personnel thoroughly checked and extinguished water , to prevent re-ignition .
( 2 ) fire water .
Use of fire water , fire hydrants and other water ; insufficient in quantity and pressure in the case , you can use fire Relay water supply, but must ensure uninterrupted water supply .
Fire precautions.

On cotton stacking fire fighting methods

Xinjiang is one of the main producing areas of China's cotton planting , storage, processing need to strengthen fire prevention work . September and October coincides with the cotton harvest season , the author of this Discussion cotton stacking fire fighting methods , and we hope to discuss , learn , and promote fire safety in cotton and other stacking work smoothly.
Stacking fire characteristics and disposal process .
Since the majority of stacking store combustible material , the surface after the fire occurred easily and oxygen react quickly , the fire could spread to the stacking inside through the gap . Cotton, hemp , grass, wood and other substances of low density, loose structure, in windy or hot air under the action of the fire , burning debris or fiber fragments group easily into the air, falling to the other stacking , and could easily lead to a large area of ​​fire. When the fire extinguished , but also by electrics tacker inspection , side turn pile , while watering , while the evacuation would take longer saves and observation, in order to completely eliminate the fire ; fire area is large, long duration, the large number of fire-fighting water .
Handling stacking fire , pay attention to the following three points :
( A ) master the basic content.
Familiar with the area and the different units open field area of the material nature of stacking , storage quantity, area , volume and stacking spacings ; fire water , and the situation surrounding buildings ; stacking inter- channel case ; stack area perennial wind conditions , according to the hand information seriously do these key units plan, and according to plan to strengthen regular exercise.
( Two ) extinguishing the basic requirements.
Officers arrived at the scene , after the pre- inquiry , investigation , should be rational use of fire water , adhere to the " trench warfare based" active evacuation and protection with a gun close stacking, control the spread of fire , the eradication of fire. Main force should deploy downwind or downwind side , to intercept the spread of fire ; should be split into several fire fighting sector , organizational gun forced interludes, isolated and surrounded the fire ; stem the same time, organize evacuations and protect adjacent heap stack ; organization personnel to closely monitor the situation falling under the wind put an fire , set the mobile forces put out the fire caused by the new flying fire point .

The main structures include

Electric stacker Stacker is the battery power as an energy source, a motor as a power source storage device. The main structures include: batteries, motors, hydraulic pumps, cylinders, piston rods, forks, chains, controller, etc. devices. Its main function is to enhance the weight to the desired height. Generally used in warehouses, workshops and other material handling needs a place, with the tray use, can greatly improve storage efficiency. Many customers now pay more attention to electric stacker corrosion work, especially in summer weather more rain, but also to enhance corrosion Electric Stacker work:
1, part structure to facilitate the implementation process protection, if necessary, set up technological holes.
2, pay attention to avoid Stacker crevice corrosion, stress corrosion cracking, electrochemical corrosion. For the inevitable gap structures such as welding hood closed the gap with sealant. Dissimilar metals connections should try to select potential is close to metal, or use insulation measures to avoid electrochemical corrosion.
3, in the electric stacker to consider the overall structure of the accumulation of anti-corrosive media. Try to avoid in an enclosed area, or remain closed system ventilation performance and good drainage system, such as battery electric forklift reach truck, the window may be opened for ventilation, to keep the motor cooling and ventilation, battery leakage hole bottom can also be set up or install plot dispenser.
4, pay attention to protection in the design, to avoid accumulation of water vapor and dust. Can learn from foreign advanced design concept electric forklifts, electric stacker so that the shape of smooth, raise the degree of the vehicle's aesthetic, functional design, but also difficult to water and fouling.
5, pay attention to the protection of the exposed parts. Electrical components and connectors must be arranged in the inside, or add a protective cover. Because the vehicle exposed corrosive and easy to water, so in these parts of the additional dust cover.

forklift jacks Services Ltd. located in the beautiful coastal city - Xiamen, the main products include forklifts, manual forklifts, manual hydraulic forklift, electric forklift, pallet truck, hand pallet trucks, bucket truck, electric pallet trucks, forklift trucks, lift trucks , elevated cars, trucks, hand truck accessories and related material handling equipment and provide technical support and training related to the truck for three consecutive years through the national quality supervision and inspection. And on December 6, 2007 passed IS09001: 2000 quality management system on-site audit, is a "heavy contract, the word" enterprise, 2O08 was granted the "AAA grade credit enterprise." Since its inception, has been the spirit of "honesty, quality and cheap, people-oriented" excellent service, to win the support and trust of the majority of users. Xiamen, Quanzhou, Zhangzhou and other places can be delivered to your door

waterproof, explosion proof, print type and other types

With weighing forklift jacks truck is a through traditional design for improved handling of Shanghai brand electronic weighing scales, truck scales can have a direct weighing in the process of moving, do serve several purposes, while saving a lot of manpower and resources, reduce costs limits, improve work efficiency. Forklift Scales function parameters
1) with a forklift weighing can be divided according to the width of wide and narrow fork two kinds, by function can be divided into common type, waterproof, explosion proof, print type and other types
2) has a simple count, weight and percentage of the function. Scale with calibration function.
3) With automatic calibration, automatic zero tracking, double overload protection.
4) welding scale structure, economical and practical; aluminum die scale structure, durable. Platform can be freely selected.
5) has the color of the LED charging indicator, clearly indicate charging status.
6) Adopt a touch button design, with 3M adhesive tape, waterproof high.
7) shell is made of ABS plastic material, long life.
8) When there is a clear lack of electricity low voltage display.
9) Large liquid crystal (LCD) display legible, with EL backlight function
Truck with weighing performance:
Forklift with a load can be realized in handling simultaneous weighing, weighing accurate, automatic data display, convenient to lift the truck movement, battery-powered, basic maintenance products.
Forklift with a load of surface spray, attractive appearance, colors yellow or navy blue;
Product tines have openings with no opening two types, forks optional light board or checkered;

using them especially comfortable

1, pallet truck scales are indispensable tools for material handling, pallet lightest, mainly any staff member can be operated.
2, tiller suitable shape, with a plastic handle clip, using them especially comfortable. Operator's hand protector protection from solid. Can be easily manipulated by hand lifting, and walking down the lever, pallet trucks use lightweight, safe and comfortable.
3, torsional steel, forks made ??from high tensile steel channel. Tines made ??of round, insert the tray, the tray from being damaged, the guide wheel so smoothly inserted into the pallet fork.
4, strong lifting system that can meet most lifting electric stacker, according to the standard requirements of galvanizing. Overload protection pump cylinder mounted on the seat, the cylinder is chromium-plated. Low control valve and pressure relief valve to ensure safe operation and long life.
5, wheels flexible operation, and is equipped with sealed bearings, front and rear wheels are made ??of durable nylon, rolling resistance is very small, and there are rubber, polyurethane or special tires for the election.
6, the hydraulic system and bearing absolutely no need maintenance, but in extreme cases, such as in wet environments or under high pressure hose to wash, all the bearings are equipped with filling hole for refueling.

 Caster design can be more effort, time on drums for handling processing.
 Can carry 5 gallons to 85 gallons of steel, plastic and fiber drums.
 Using a special cam clamping device, the barrel will not loose handling, safe.
Applications:
 1 purely mechanical structure design, high quality steel, light weight, good rigidity. Carry a bucket at once.
(2) using the unique "Parrot's Beak" clamping jaws institutions.
3 chuck according to the bucket size, adjust quickly and easily clamping and handling.
4 rack nursing care can round drums provide good support and protection.
5 can Hand Pallet Truck 5 gallons to 85 gallons of steel, plastic and fiber drums.
6 using a special cam clamping device, the barrel will not loose handling, safe.
7 rod chrome plated, beautiful, long service life.
8 compared with HT-10 2 more caster design can be more effortless handling.

Safe and effective portable bucket is moving pallets, shelves, pan, overflow tray or container pallet and down the drums the best choice.
? Parrot's Beak ? clamping unit, automatic safety grab steel drums, fiber drums, plastic barrels, and make lifting operations.
? The unique V-shaped cross-type legs, coupled with retractable adjustment means, the buffer belt lifting, landing, during transport to protect the edge of the bucket.

so that no dust, no yellow robe. Check for cracks, open welding.

 bridge cranes appearance: a comprehensive clean appearance, so that no dust, no yellow robe. Check for cracks, open welding.

2), carts, trolleys: ① check and tighten the shaft seat, gear boxes, couplings and scissor pallet truck, keys are loose; ② Check and adjust the brake wheel clearance to make it uniform, sensitive and reliable.
3), check the bridge crane reducer mainly to see if it leaking. Runtime cabinets abnormal sound, we must open the lid inspection. Generally due to bearing damage or gear backlash is too large, severe tooth wear due to other reasons.
4), the lifting winch: ① Check wire, hook, the blocks are safe and reliable, wear exceeds a predetermined value should be replaced. ② Check and adjust the brakes, to make it safe, sensitive and reliable.
5), overhead crane wire rope inspection. Check the broken wire rope should focus on observation, abrasion, kinks, rust, etc., for some wear and tear, broken wire is more serious but not excessive position, to do a mark in order to focus on tracking the re-examination. Make sure to check the safety rope on the drum stopper is valid, wire rope on the drum plate number plate is pressed and appropriateness.
6), Lubrication: Check all parts of the oil, fuel, lubricating oil required to join or replace.
7), the inspection of the overhead traveling crane pulley. Focus on the bottom wear is excessive and cast iron pulleys for cracks. For institutions pulley overlooking Yang balance wheel, because it does not operate normal conditions, it is easily overlooked. So, be sure to check before installation flexibility of its rotation, otherwise, the installation length of rope around overlooking Yang and tension can not balance wheel to automatically adjust, so that an increase in the height adjustment overlooking Yang rope and operational risk level of difficulty.
8), electrical: ① Check the limit switch is sensitive and reliable; ③ Check the electrical box in the electrical action is sensitive and reliable; ③ check the motor, bells, wires are safe and reliable; ④ Check the signal is good.

Yingkou use China's largest portal cranes

China's largest gantry crane, lifting capacity of up to six hundred tons, and can move the walking recently in Liaoning Yingkou Port officially put into use.
China's largest gantry crane, lifting capacity of up to six hundred tons, and can move the walking recently in Liaoning Yingkou Port officially put into use.
The device is designed and manufactured by our own, is currently the country's largest port terminal lifting capacity gantry cranes. Equipment for official use, not only convenient Yingkou Port, and can bring about the Northeast base, revitalize their economyIn the recent few years, the more car tire cranes out there is a feature that currency as the length of increasingly long crane, Scissor lift weight is also growing.
In the recent few years, the more car tire cranes out there is a feature that currency as the length of increasingly long crane, lifting weight is also growing.
But after an investigation found that this is only appearance, in spite of this there is the use of repair, but customers still prefer small tonnage and their own small cranes.
For an extra long arm, demand mainly from the oil refining industry, as well as the electricity sector, they themselves do not want to use the jib, in order to reduce risk. It is generally equipped with a large crane arm long vehicles, small tonnage crane can be freely selected.
The tire crane trends will be based on different site conditions with the right crane arm, which should give customers more freedom of choice.

XCMG four thousand tons crane raised public concern

Sinopec Tenth Construction Company Limited and jointly developed by XCMG crane tonnage of the world's largest crane - four thousand tons crawler crane was officially opened
Sinopec Tenth Construction Company Limited and jointly developed by XCMG crane tonnage of the world's largest crane - four thousand tons crawler crane was officially opened, and in Yantai Wanhua Industrial Park will tonnage 1680 tons of propylene tower success lifting, sparked widespread mainstream media attention and coverage.
People's Daily said the 4000-ton crawler cranes successful development of the China Petrochemical Group and XCMG carry out a comprehensive strategic cooperation is a major Manual stacker, is China's machinery manufacturing and construction enterprises successful example of the depth of integration. Even CCTV News Network reports have done.
Dazhong Daily said, this is a technological revolution, the combination of many people's efforts.
In order to do publicity work, ten construction companies have done a lot of preparatory work in advance.

Konecranes debut in Shanghai Exhibition

Konecranes Group is the world's leading crane manufacturers and service providers, with a wide range of practical electrics tacker, covering a number of areas industries.
Professional manufacturer Konecranes cranes will lead their own multiple devices and products unveiled AMTS2013 Shanghai International Automotive Manufacturing Technology & Materials Exhibition, the exhibition August 20-22 at the Shanghai New International Expo Centre.
Konecranes Group is the world's leading crane manufacturers and service providers, with a wide range of practical experience, covering a number of areas industries.
ATB pneumatic balancer can replace the lift, and can improve customer profitability.
ATL vertical lift to meet different customer requirements, operating more smoothly.
XA aluminum light crane system has a maximum lifting can be staggering two thousand tons, rolling resistance.By the heavy Group, Sinochem two Construction Group, Synfuels Technology Co., Ltd. jointly developed by 6400 tons hydraulic crane penthouse formally adopted acceptance. It is the world's largest lifting capacity of hydraulic lifting cranes, or to enhance the maximum weight, maximum lifting height of the land lifting equipment, the maximum lifting capacity of a staggering six thousand four hundred tons. Wagon can be one hundred to one hundred and twenty meters of weight lifting altitude!
R & D as long as the device is designed to meet the needs of industry oil industry, relatively large crawler cranes before, the device itself is of good performance and low cost, their light weight, small footprint, and can greatly improve economic efficiency.

The world's largest land-based crane in China

It is the world's largest Scissor lift capacity of hydraulic lifting cranes, or to enhance the maximum weight, maximum lifting height of the land lifting equipment, the maximum lifting capacity of a staggering six thousand four hundred tons. Wagon can be one hundred to one hundred and twenty meters of weight lifting altitude!
By the heavy Group, Sinochem two Construction Group, Synfuels Technology Co., Ltd. jointly developed by 6400 tons hydraulic crane penthouse formally adopted acceptance. It is the world's largest lifting capacity of hydraulic lifting cranes, or to enhance the maximum weight, maximum lifting height of the land lifting equipment, the maximum lifting capacity of a staggering six thousand four hundred tons. Wagon can be one hundred to one hundred and twenty meters of weight lifting altitude!
R & D as long as the device is designed to meet the needs of industry oil industry, relatively large crawler cranes before, the device itself is of good performance and low cost, their light weight, small footprint, and can greatly improve economic efficiency.
Petrochemical industry large lifting equipment requirements for growing, there will be more demand for large tonnage, while the device is in the development process also has a number of patents, R & D for future production to provide a reference.

Trinity international market rise crane

Saudi Arabia was one of the staff tried to get a large forklift jacks Saudi leasing companies to purchase hundreds of cranes, then drew a lot of attention of international brands.
In the last in 2012, Sany Heavy Industry in the international market sales reached 1.1 billion yuan, an increase of 50%. Sany Heavy is the deputy general manager of international marketing from all of this witness.
Real opportunity took place in 2011, when Saudi Arabia, a Saudi employee tried to get a large lifting leasing companies to purchase hundreds of cranes, then drew a lot of attention of international brands.
Although thirty-one fame was in Saudi Arabia is not large, but decided to try to fight high-level, so make unremitting efforts, our customers finally agreed to come to Trinity Industrial Park visit.
Came, the customer immediately by Trinity shocked by the atmosphere and rigorous, but also the excellent performance of the device does not make people amazed, customers immediately added thirty sets of orders.
It was Trinity's first large international orders, after which the company has signed a big one and Trinity also strive for perfection in their products, the international order more and more.

SPECIFICATIONS Electrical wiring protection crane safety

Scissor lift happened in the past few years, a lot of accidents, some stories as a result of improper operation of the driver, and some circuitry accident was due to a fault in itself caused.
Lifting happened in the past few years, a lot of accidents, some stories as a result of improper operation of the driver, and some circuitry accident was due to a fault in itself caused.
Therefore, the relevant electrical components and electrical specifications alignments is particularly important if the quality of the product itself does not pass, it is easy to cause a failure to form a safety hazard.
How Jigging quality guaranteed products? Or to look for national testing. The relevant specifications is also very important, and if there are no standard or develop is not clear, if there is a problem and can not be repaired, we should make this as brief as possible, and a number of senior electrician advantage.In the recent few years, the more car tire cranes out there is a feature that currency as the length of increasingly long crane, lifting weight is also growing.
But after an investigation found that this is only appearance, in spite of this there is the use of repair, but customers still prefer small tonnage and their own small cranes.
For an extra long arm, demand mainly from the oil refining industry, as well as the electricity sector, they themselves do not want to use the jib, in order to reduce risk. It is generally equipped with a large crane arm long vehicles, small tonnage crane can be freely selected.
The tire crane trends will be based on different site conditions with the right crane arm, which should give customers more freedom of choice.

Rough-terrain cranes, arm length is very important Author

In the recent few years, the more car tire cranes out there is a feature that currency as the length of increasingly long crane, lifting weight is also growing.
In the recent few years, the more car tire cranes out there is a feature that currency as the length of increasingly long crane, lifting weight is also growing.
But after an investigation found that this is only appearance, in spite of this there is the use of repair, but customers still prefer small tonnage and their own small cranes.
For an extra long arm, demand mainly from the oil refining industry, as well as the electricity sector, they themselves do not want to use the jib, in order to reduce risk. It is generally equipped with a large crane arm long vehicles, small tonnage crane can be freely selected.
The tire crane trends will be based on different site conditions with the right crane arm, which should give customers more freedom of choice.n June 2012, Saudi Arabia's largest leasing company hoisting revisit the Trinity, has signed a more than two hundred million yuan of large orders, and became a thirty-one exclusive distributor in Saudi Arabia.
By June this year, in two and a half Hand pallet trucks, Trinity has sold more than four hundred in Saudi cranes, worth more than $ 800 million in market share is nearly 40%. Become Saudi regional sales champion.
Back in time to 2011, when Saudi Arabia's infrastructure construction in full swing, you need a large number of cranes, and that a large single thirty-one have faced many opponents.

ultimately successful large single sign.

By June this year, in two and a half hours, Trinity has sold more than four hundred in Saudi cranes, worth more than $ 800 million in market share is nearly 40%. Become Saudi regional sales champion.
In June 2012, Saudi Arabia's largest leasing company hoisting revisit the Trinity, has signed a more than two Hand Pallet Truck million yuan of large orders, and became a thirty-one exclusive distributor in Saudi Arabia.
By June this year, in two and a half hours, Trinity has sold more than four hundred in Saudi cranes, worth more than $ 800 million in market share is nearly 40%. Become Saudi regional sales champion.
Back in time to 2011, when Saudi Arabia's infrastructure construction in full swing, you need a large number of cranes, and that a large single thirty-one have faced many opponents.
At that time, general manager of the Saudi subsidiary after multi-party efforts, and finally let people come to the domestic investigation, powerful and complete product performance to conquer the customer, and ultimately successful large single sign.
By this year, Saudi Arabia is ready to develop the world's largest public transportation system, new opportunities and new challenges are coming, Trinity ready!

Become Saudi regional sales champion.

In June 2012, Saudi Arabia's largest leasing company hoisting revisit the Trinity, has signed a more than two Hand pallet jacks million yuan of large orders, and became a thirty-one exclusive distributor in Saudi Arabia.
By June this year, in two and a In the recent few years, the more car tire cranes out there is a feature that currency as the length of increasingly long crane, lifting weight is also growing.
In the recent few years, the more car tire cranes out there is a feature that currency as the length of increasingly long crane, lifting weight is also growing.
But after an investigation found that this is only appearance, in spite of this there is the use of repair, but customers still prefer small tonnage and their own small cranes.
For an extra long arm, demand mainly from the oil refining industry, as well as the electricity sector, they themselves do not want to use the jib, in order to reduce risk. It is generally equipped with a large crane arm long vehicles, small tonnage crane can be freely selected. hours, Trinity has sold more than four hundred in Saudi cranes, worth more than $ 800 million in market share is nearly 40%. Become Saudi regional sales champion.
Back in time to 2011, when Saudi Arabia's infrastructure construction in full swing, you need a large number of cranes, and that a large single thirty-one have faced many opponents.
At that time, general manager of the Saudi subsidiary after multi-party efforts, and finally let people come to the domestic investigation, powerful and complete product performance to conquer the customer, and ultimately successful large single sign.
By this year, Saudi Arabia is ready to develop the world's largest public transportation system, new opportunities and new challenges are coming, Trinity ready!In the recent few years, the more car tire cranes out there is a feature that currency as the length of increasingly long crane, lifting weight is also growing.
In the recent few years, the more car tire cranes out there is a feature that currency as the length of increasingly long crane, lifting weight is also growing.
But after an investigation found that this is only appearance, in spite of this there is the use of repair, but customers still prefer small tonnage and their own small cranes.
For an extra long arm, demand mainly from the oil refining industry, as well as the electricity sector, they themselves do not want to use the jib, in order to reduce risk. It is generally equipped with a large crane arm long vehicles, small tonnage crane can be freely selected.

lifting weight is also growing.

In the recent few years, the more car tire cranes out there is a feature that currency as the length of increasingly long crane, forklift jacks weight is also growing.
In the recent few years, the more car tire cranes out there is a feature that currency as the length of increasingly long crane, lifting weight is also growing.
But after an investigation found that this is only appearance, in spite of this there is the use of repair, but customers still prefer small tonnage and their own small cranes.
For an extra long arm, demand mainly from the oil refining industry, as well as the electricity sector, they themselves do not want to use the jib, in order to reduce risk. It is generally equipped with a large crane arm long vehicles, small tonnage crane can be freely selected.
The tire crane trends will be based on different site conditions with the right crane arm, which should give customers more freedom of choice.

a lot of accidents

 Lifting happened in the past few years, a lot of accidents, some stories as a result of improper operation of the driver, and some circuitry accident was due to a fault in itself caused.
Therefore, the relevant electrical components and electrical specifications alignments is particularly important if the quality of the product itself does not pass, it is easy to cause a failure to form a safety hazard.
How Jigging quality guaranteed products? Or to look for national testing. The relevant specifications is also very important, and if there are no standard or develop is not clear, if there is a problem and can not be repaired, we should make this as brief as possible, and a number of senior electrician advantage.

    Chinese crane career to complete with the world, not just Scissor lift on the crane manufacturing industry, encompassing parts production to promotion, but also downstream lifting career in the construction process technology transformation, lifting managerial innovation, and user technology, knowledge All promotions. In the first advance under the enterprise to vocational technical advancement lifting as the starting point of all femoral artery downstream industries using strength promotion, promote career advancement lifting of the air has been very dense. In this regard, XCMG after hoisting technology and promote the national contest, writing "large equipment hoisting Practical Handbook", fuck machine hand training base made the first active and fruitful quiz.

    Fifth, is the professional conduct and corporate citizenship responsibilities depth blend

The development potential of lifts

Posted by: 123 Read 237 times Published: September 10, 2012 Print This Page
Remained weak economic data in Europe today, the Chinese PMI data show signs of recovery; China released the official manufacturing purchasing managers index (PMI) data was 45.3, indicating manufacturing is gradually picked up. World generally believe that China's strong economic fundamentals, strong financial power to make it withstand the financial crisisGlobal crane hoisting hundred summit and China held in Beijing. China Construction Machinery Industry Association, Qi Chun at the meeting showed that China as the world's cranes career major malls, shopping centers toward the future, has become the focus of global enterprises to pay attention, to powered palle ttruck Chinese crane lifting career is an important effort undertaken mall.

Qi Chun showed that in 2012 China's macro economy continued to decline, construction machinery along with career growth also presents a rare slowdown. Shopping malls increased demand weakness, occupational decompose further increase competition has become even more intense, as construction machinery industry is an important part of the crane occupation facing important issues. China as the world's cranes career major malls, shopping centers toward the future, has become the focus of global corporate attention.

Qi Chun showed that although the internal environment Qianan, but in 2012 the mall overseas to broaden beyond nature has gained increased to hoist occupation, for example, from 2001 to 2010 this decade, employment income increased by 47.09 times, exports increased 130.05 times. Profession to the world is not only consistent, it is a common career move. Although there are still many needs of the current deal, but the results obtained are also well known, the subsequent occupation of foreign enterprises should further learning, and constantly promoted concept of operations, operational quality, skills development can, try to do better the occupation, Occupation is to promote Chinese crane hoisting mall undertaken important effort.

Crane prototype

Chinese ancient irrigation is used orange jib crane prototype.
14th century, Western Europe showed a shift of human and animal-driven boom cranes.
Early 19th century, showing apallet jacks crane; crane important wear parts such as shafts, gears and spreader used metal materials such as beginning and start optional hydraulic drives.
Late 19th century, steam-driven hydraulic crane gradually replace the crane driver.
The beginning of the 1920s era, because the electrical industry and the rapid development of the internal combustion engine industry to electric motor or internal combustion engine-powered equipment of all kinds cranes fundamental composition.
Composition layout
Include lifting cranes primary organization, functioning organization, luffing organization, reverse tissue and metal layout. Lifting crane organization is a fundamental task organization, mostly by hanging system and winch components, but also through the hydraulic system lifting heavy objects. Organization to operate or adjust the level of vertical migration of heavy crane operating position, is usually caused by motor, speed reducer, brake and wheel components. Luffing jib type organization only equipped in the crane, jib looked up and downs when reduced, bent downs when increasing amplitude of balanced and unbalanced luffing two kinds. Reverse organizations use to make the boom reversed, is supported by the drive device and the reverse devices. The layout is the skeleton of metal crane, the primary carrier such as bridge, boom and mast for box-shaped layout or truss layout, but also for web layouts, and some can be used as a steel support beam.

Mobile cranes Cranes Overview

Posted by: admin Read 504 times Published: October 6, 2012 Print This Page
  Crane rental handling large crane lifting Jiangmen Jiangmen crane rental
diào chē widely used in ports, workshops, construction sites and other places of lifting transfer machinery.
Crane species: A. Movable: truck crane, crawler cranes, cranes and other lines. B. Fixed: dock cranes, tower cranes, gantry cranes and so on. This name is consistent with the crane a title.
Frequently called the crane is still the primary automobile cranes, crawler cranes and RTGs.
The usefulness crane and hoisting equipment, rescue, lifting, machinery, rescue. Concept: Crane Crane is commonly known, the crane (Crane) attributed to a crane, is a for loop, intermittent movement of machinery. An operating cycle include: extract extract device from the lift to put items, then move horizontally to the scissor pallet truck address down items, followed by reverse movement, so extract the device back into place, so that the next cycle. Such as fixed Inversions cranes, tower cranes, truck cranes, tires, crawler cranes.
Must be promoted in the range of straight and horizontal transfer of many initiatives to lifting heavy objects. Also known as the crane. Attributed to material transfer machinery. The operating characteristics of the crane is doing intermittent exercise, ie a job reclaiming cycle, migration, unloading and other initiatives is to replace the jobs corresponding organizations.

Cold storage in the use of the electric lift

Today a customer to inquire Northeast Harbin low temperatures using electric lift, the customer is to make electric lift installed in the cold, the fear will be solidified hydraulic oil temperature is too low, the impact of an electric lift lifting speed.
Low temperature hydraulic oil to be affected by an electric lift, hydraulic oil viscosity is critical, high viscosity, friction within the system increases, the pressure loss is increased, the oil temperature rises too rapidly, the operation delay action; viscosity is too low, the pump the volumetric efficiency is low, poor lubrication, friction increases movement between components. Hydraulic oil viscosity with temperature changes, so choose low-temperature hydraulic oil should pay special attention.
Today Huize recommend a machine for Electric pallet truck aviation hydraulic oil - the ground with the 10th aviation hydraulic oil, this product is suitable for a variety of demanding hydraulic systems working fluid, and the cold zone and airport ground variety of hydraulic machinery and equipment. Such as CNC machine tools, ethanolamine circulation pump, high pressure pump and ship ethylene cranes, deck machinery, excavators, windlass, large cranes and so on. Aviation hydraulic oil is Huize machinery used specifically for low temperature environments snorkels customers specially configured. The minimum ambient temperature can reach minus 45 degrees.

Solve the problem of hydraulic oil, cold storage using electric lift can be a normal operation, the normal landing speed of 3-5 meters per minute, of course, the customer is very satisfied with our products, has reached a cooperation intention

Manually lift the introduction and classification

Manually lift is relative to the electric lift terms, do not use any power supply, manual hand pump directly beneficial to achieve lift, manual lift, also called hand lift or hand pressure lifts, manual hand lift from the use of a small amount, usually no stocking, need to be customized or modified on the basis of an electric lift.
Manually lift platform is generally applied to a small table, a small load, the height of small industries or small lifts and special places, such as more scissor pallet truck power control petrochemical industry, the wild places without power supply and so on. Small lift with manual lifting more simple and convenient, without the power to tie him down, the flexibility to move. Use hand lifting platform petrochemical industry safer, more environmentally friendly.
Manually lift there are many, the most used is a small lift platform trucks, four lifts and aluminum portable manual hand lift, as shown below.
Four mobile lift is manually movable in a conventional four lifts on the basis of modification, the pump station into the hand pump, remove the corresponding electrical appliances. Aluminum Hand lift, also called hand material machine, mainly used for exhibition structures, stage lighting, sound suspension, product publicity display, architectural beams, air duct installation and removal and so on.
           

Jinan Huize Machinery is a professional elevator manufacturer, can produce kinds of manual lifts, electric lifts, to meet customer needs.
A Sinopec customers just Huize mechanical ordered eight four portable manual lifts, because industry needs customers, without access to any power you can manually lift lifting operations safer, more environmentally friendly, a lot of customers compared lift manufacturers , the final choice Huize, the first independent research value Huize technical capacity, and the second value Huize perfect service system, the election to choose to go or choose TG.

Manually lift the introduction and classification

Manually lift is relative to the electric lift terms, do not use any power supply, manual hand pump directly beneficial to achieve lift, manual lift, also called hand lift or hand pressure lifts, manual hand lift from the use of a small amount, usually no stocking, need to be customized or modified on the basis of an electric lift.
Manually lift platform is generally applied to a small table, a small load, the height of small industries or small lifts and special places, such as more stringent power control petrochemical industry, the wild places without power supply and so on. Small lift with manual lifting more simple and convenient, without the power to tie him down, the flexibility to move. Use hand lifting platform petrochemical industry safer, more environmentally friendly.
Manually lift there are many, the most used is a small lift platform trucks, four lifts and aluminum portable manual hand lift, as shown below.
Four mobile lift is manually movable in a conventional four lifts on the basis of modification, the pump station into the hand pump, remove the corresponding electrical appliances. Aluminum Hand lift, also called hand material machine, mainly used for exhibition structures, stage lighting, sound suspension, product publicity display, architectural beams, air duct installation and removal and so on.
             

Jinan Huize Machinery is a professional Electric pallet truck manufacturer, can produce kinds of manual lifts, electric lifts, to meet customer needs.
A Sinopec customers just Huize mechanical ordered eight four portable manual lifts, because industry needs customers, without access to any power you can manually lift lifting operations safer, more environmentally friendly, a lot of customers compared lift manufacturers , the final choice Huize, the first independent research value Huize technical capacity, and the second value Huize perfect service system, the election to choose to go or choose TG.

Double cross stationary hydraulic lift table selection

Double cross stationary hydraulic lift table is to satisfy our customers laden weight of large, bulky and specially designed large table, a large truck, double scissor structure snorkels.
Two-span structure snorkels lift more stable, more load capacity, higher safety factor, but two-span structure also has its specific weaknesses.
Some customers in order to increase the stability of the lifting platform and safety, their request double cross-hydraulic lifting platform, lifting platform, but its required pallet jacks is not necessary to make double-cross style, single-span style will be able to meet its normal operational requirements.
Double cross stationary hydraulic lift table using two groups scissor structure will inevitably increase the cost, by the impact of strut length and number of layers, lifting platform will also increase their height, another double cross stationary hydraulic lift table also to consider its synchronization problem, if the goods can not be placed in a central location, and will certainly appear partial load, strut level will increase too much wear and tear, affecting the life of the lifting platform.
Therefore, customers in the selection lifting platform products or to listen to the views of Shandong lift manufacturer, we will in general for you to consider.

he production of various goods lifting

Cargo lift the cargo transporter is a rise from the lower lifting height lifting equipment, cargo handling units called lift lifting platform, lifting freight elevators, hydraulic lifts and so on. Driven by hydraulic cylinders operating system, according to different structures, is divided into scissor lift freight and rail cargo lifter.

Jinan Huize machinery specializing in the production of various goods lifting platforms, loading freight, cargo lifter, logistics handling platform - hydraulic dock leveler, free consultation 4006 -511-007. TG is a professional cargo lifter machinery manufacturer, is the first production of one of the manufacturers of hydraulic lifting platform, after nearly ten years of development, our customers across the country, the products are exported to Southeast Asia.

Hydraulic cargo lift has been widely applied to various places, also called hydraulic lift freight lifts, goods lifts, hydraulic freight elevators, etc., because the hydraulic cargo lift is mainly used laden, but it also differs from conventional lifts because the hydraulic cargo lift is hydraulic lift system to achieve the job.

Hydraulic cargo electrics tacker according to the structure is divided into different scissor lift freight and rail cargo lifter, little difference between the two prices are lifts, goods lifts a great choice.

To save you time, here we give you a few suggestions ordering!
1, Please make sure your lifts in what places to use, so that we can recommend the product more suitable for your lift!
2, the frequency of use of lifts
3, working voltage: 380/3/50, 220/2/50 or other special requirements
4, lift rated load: Kg
5 lifts at rated load, the rise or fall time (when required): second
6, table size: (length mm * Width mm)
7, shut height (if necessary): mm
8, the vertical stroke: mm
9, the hydraulic power system installation location: internal or external, such as an external, power system from the lift distance mm
10, the electrical control system: handle button foot control, electrical control box for you to choose.

Special lifting platform customized workshop and warehouse

Factory workshop and warehouse with lifts lifts with Hand Pallet Truck  platform is the main force, workshop and warehouse also places the greatest demand lifts, aerial equipment maintenance within the plant, assembly line repetition of material on the level of operations, warehouse frequent need to lift cargo handling platform to help.
Lines within the plant maintenance, replacement of lighting is generally used four mobile lifts, traction moving through changing workplace, as a professional manufacturer of lifting platforms, four mobile mechanical lifts 4-12 m Huize have ordered, can be directly shipped, you can click to enter the mobile lifting platform for more knowledge.
Special lifting platform assembly line according to customer requirements needed lift height, unladen weight, countertops customized size can be made according to need tilt tops, flip tops, etc., can be configured to attached devices, in any combination, the transport process is fully automated, no operator manual handling, to ensure the safety of the operator and work efficiency.
Lifting platform for warehouse storage of goods up and down the main transport and cargo handling out of the warehouse, which is two different types of lifts, Huize Machinery for everyone Intro about:
Warehouse cargo transport cargo lifter up and down the height difference is mainly used for storage of goods between the delivery, according to different structures, warehouse transport can be divided into scissor lifts lifts and rail lifts, the figure is a scissor lift structure warehouse, under Pictured rail structure warehouse lifts, the specific choice of which structure may consult Huize sales engineer.

Special lifting platform customized workshop and warehouse

Factory workshop and warehouse with lifts lifts with lifting platform is the main force, workshop and warehouse also places the greatest demand lifts, aerial equipment maintenance within the plant, assembly line repetition of material on the level of operations, warehouse frequent need to lift cargo handling platform to help.
Lines within the plant maintenance, replacement of lighting is generally used four mobile powered palle ttruck, traction moving through changing workplace, as a professional manufacturer of lifting platforms, four mobile mechanical lifts 4-12 m Huize have ordered, can be directly shipped, you can click to enter the mobile lifting platform for more knowledge.
Special lifting platform assembly line according to customer requirements needed lift height, unladen weight, countertops customized size can be made according to need tilt tops, flip tops, etc., can be configured to attached devices, in any combination, the transport process is fully automated, no operator manual handling, to ensure the safety of the operator and work efficiency.
Lifting platform for warehouse storage of goods up and down the main transport and cargo handling out of the warehouse, which is two different types of lifts, Huize Machinery for everyone Intro about:
Warehouse cargo transport cargo lifter up and down the height difference is mainly used for storage of goods between the delivery, according to different structures, warehouse transport can be divided into scissor lifts lifts and rail lifts, the figure is a scissor lift structure warehouse, under Pictured rail structure warehouse lifts, the specific choice of which structure may consult Huize sales engineer.

Wuxi forklift truck manufacturers tell you the important components: pressure transmitter

forklift jacks important components: pressure transmitterForklift In normal use, the pressure transmitter AC voltage with gear speed increases, so at work not only to confirm the electromagnetic induction coil good, you also should be detected with a multimeter AC voltage signal. Because electromagnetic angular velocity pressure transmitter with gear tooth spacing between the top of the speed measurement has a crucial impact.
 Pressure transmission output signal peak voltage amplitude and his gap related to the output value of the small air gap is large, this is more conducive to testing. But also for the manufacture of precision DUT progress with assembly requirements, which makes a corresponding increase in manufacturing costs; gap big pressure transmitter under test and assembly manufacturing precision parts that require low, but the output signal peak voltage amplitude is small, is not conducive to detect the first to use screw wrench pressure transmitter, pressure transmitter until the top section and the gear tooth contact; followed by a pressure transducer roundabout half circle, so the gap is 0.5 ~ 1.5mm ; finally tighten the lock nut, the pressure transmitter fixed.
 Install pressure pressure transmitter, pressure transmitter end should be positive for the gears. Fixed, you also need to measure the angular velocity of the pressure transmitter electromagnetic induction coil resistance size. Failure to observe AC voltage signal, check the pressure transmitter installation status; if observed AC voltage signal, you need to check the pressure transmitter is connected to the corresponding controller line.
 It can be seen, forklifts angular accuracy pressure transmitter installed or not on a great influence on measurement results, the air gap needs to be adjusted to an appropriate value, then multimeter to test whether intact, in order to put into use. Electromagnetic pressure transmitter pressure transmitter angular gap is also an important parameter, usually 0.5mm to 1.5mm as well. Therefore, the use of a forklift pressure transmitter is very much.

Forklift problems in the course overview

forklift jacks overview of issues in the course of
In our daily life, more and more popular use of the machine, especially in the industrial sector, especially, from the forklift products are widely used as a comparison. Walking to the major industrial parks, we can clearly see the use of various types of forklift products, and effectively enhance the work efficiency of the staff.
According to many industry insiders feedback, in the actual operation found many problems, including the following:
First, many companies are prevalent in a more obvious problem, and that is planned from the weight of the product is much greater than the actual amount of work required, this will lead to increased consumption. This is something obvious, there is a knife to kill a chicken slaughter of cattle is certainly very wasteful. Resulting in waste of resources will not only make life of the product being affected, will increase the more wear and tear.
Second, because of its limitations, making the product difficult to achieve in many work goals. This is mainly because the product itself wheel pressure, therefore the traveling resistance which has a relatively weak ability to trap.
Finally, the travel speed is too slow for this product is a big problem, sometimes moving too far away can cause more serious fuel consumption, which the enterprise is a great deal of pressure.

Electric Stacker most easily consumable accessories from the Which?

       Electric pallet truck with internal combustion vehicles, eliminating the fuel consumption of this part of the costs. Especially when international oil prices, many companies through fine calculation, will eventually find electric forklift trucks, electric forklift during use to cost much more than the internal combustion forklifts. Forklift used as an essential business tool that is needed maintenance, of which a large part of wearing parts forklift maintenance aspects. Because most of the forklift business is not for wearing parts warranty. So for this consumable parts in the end we should know about, including what specific areas:
1, the outer drive wheel

High-strength polyurethane production, depending on customer usage, wear time is different. Most factories in the use of two years or so, need to be replaced. Very easy to replace, just hold up the all-electric forklift truck, remove the screw on the outer wheel, you can remove the replacement.

2, balance wheels, load wheels

High-strength polyurethane production, depending on the intensity of work and utilization, the replacement time is not necessarily. So the price is not high, customers generally need to be replaced in a year more, there are less than one year on the replacement, often using high intensity customers. Replacement of these two wheels, is very simple.

3, lead-acid batteries

    Currently forklift product is used in traction maintenance-free batteries, power and durable, can charge and discharge 1200 cycles, a charge can be used continuously for seven hours or so. Battery life, with the customer's normal maintenance have great relevance, such as initial charging time, there is no timely charge after use lead-acid batteries can not overcharge, but can not due to charge, in power after use, immediately charging , the battery is not easily cured, the service life will be longer. Generally one to two years to be replaced. Our longest customers, using more than two years, but also can be used normally. Due to high international prices of lead, so the relatively high price of batteries.

4, the hydraulic oil

Customers are advised to use the forklift year after replacing the hydraulic oil. Replacement of the hydraulic oil, the main pump and the cylinder is to ensure the performance, without clogging phenomenon

Center hydraulic lifting lever set door frame and front and rear in one

3, cab because most electric forklift for indoor handling, so generally do not have a closed cab, only install from the protective effect of the overhead guard. The world's more advanced electric forklift, according to advanced ergonomic principles developed, the use of hydraulic damping comfort suspension seat, according to the driver's height and weight adjustment. Two pedal acceleration system change direction the pallet jacks without steering column inclination of the steering wheel can be adjusted to the driver's requirements. Center hydraulic lifting lever set door frame and front and rear in one. These new designs are so greatly reducing the labor intensity of the driver.
4, the drive system drive system is one of the key components of electric forklifts. Various truck in the drive system's structure there is a big difference between a single motor arranged in form there are also differences. As a dual motor drive, acceleration and climbing performance, traction, full speed using an electronic system to replace the original mechanical differential system, usability has been greatly improved.
5, the hydraulic system is generally used electric forklift separate motor driven gear pump, thus its mast lift and tilt working system to provide hydraulic power. Currently domestic forklift, as the hydraulic motor speed is not implemented, the hydraulic motor starts, the only high-speed rotation, the pressure does not vary with changes in the functions and automatically adjust only the excess flow back into the tank through the relief valve, cause energy waste. New forklift abroad, such as the E20 electric forklift LINDE, using advanced hydraulic impulse control technology, hydraulic pump pulse controller can react according to the hydraulic circuit, self-balancing motor speed and fuel consumption, thereby saving energy, the advantages of this control power utilization is high, no voltage peak, low noise hydraulic system, hydraulic components wear is also low, which greatly improved the reliability and service life of the vehicle.

according to advanced ergonomic principles developed

cab because most electric forklift for indoor Hand pallet jacks, so generally do not have a closed cab, only install from the protective effect of the overhead guard. The world's more advanced electric forklift, according to advanced ergonomic principles developed, the use of hydraulic damping comfort suspension seat, according to the driver's height and weight adjustment. Two pedal acceleration system change direction the truck without steering column inclination of the steering wheel can be adjusted to the driver's requirements. Center hydraulic lifting lever set door frame and front and rear in one. These new designs are so greatly reducing the labor intensity of the driver.
4, the drive system drive system is one of the key components of electric forklifts. Various truck in the drive system's structure there is a big difference between a single motor arranged in form there are also differences. As a dual motor drive, acceleration and climbing performance, traction, full speed using an electronic system to replace the original mechanical differential system, usability has been greatly improved.
5, the hydraulic system is generally used electric forklift separate motor driven gear pump, thus its mast lift and tilt working system to provide hydraulic power. Currently domestic forklift, as the hydraulic motor speed is not implemented, the hydraulic motor starts, the only high-speed rotation, the pressure does not vary with changes in the functions and automatically adjust only the excess flow back into the tank through the relief valve, cause energy waste. New forklift abroad, such as the E20 electric forklift LINDE, using advanced hydraulic impulse control technology, hydraulic pump pulse controller can react according to the hydraulic circuit, self-balancing motor speed and fuel consumption, thereby saving energy, the advantages of this control power utilization is high, no voltage peak, low noise hydraulic system, hydraulic components wear is also low, which greatly improved the reliability and service life of the vehicle.

Electric forklift structural features and technical characteristics

 Electric forklift jacks is a DC power (battery) powered handling and transportation vehicles. According to foreign statistics, the Japanese electric forklift truck production has exceeded the total amount of 1/3. In Germany, Italy and some other Western European countries, the proportion of electric forklift reach about 50%. Electric forklift mainly due to the rapid development of the continuous progress of the manufacturers. Product appearance mostly with a streamlined design, modeling more beautiful. Major manufacturers realized the scale specialized production and spare parts production and assembly line operations. Precision, the degree of automation have increased. In the new materials, new technology, the most important manifestation of the transistor controller (SCR and MOS tube) applications. It appears that the use of electric forklift performance is greatly improved, generally speaking, electric forklift durability, reliability and applicability have been significantly improved, can compete with the internal combustion forklifts. This article comments on the market sales of larger four-wheel electric forklift balanced structural characteristics and development.
1, truck body is the main structure of the body, usually from the more than 5mm steel plate, which features a monocoque, body strength, can withstand overloads. On the forklift battery placement on the body, there are two different manufacturing techniques, namely the battery placed in or between the front and rear axles on the rear axle. Both technologies represent two Optimal truck design choice, and their advantages and disadvantages, good stability, but the car body of the available space is small, thus limiting the capacity of the battery, which does not exceed the carrying capacity of 3t forklift is not prominent, but for those sports complicated, 8h working hours, battery capacity demanding large-tonnage truck becomes serious.
Using a large capacity battery to extend the continuous electric forklift working hours, thereby expanding the use of electric forklifts, forklift manufacturer which is the common goal. The second case, when the battery is disposed in the rear axle truck, the truck's center of gravity improves, machine stability affected due to increase in the height of the truck, the driver's seat to improve, so the driver when operating a broader perspective, especially cargo handling large volume even apply. When the battery is placed in the rear axle, motor and hydraulic pump maintenance more convenient because the battery and take the pedals removed, the motor and pump it at a glance. At present, the domestic production of electric forklift, is the second most used technology, and foreign enterprises both.
2, the door frame at present, domestic electric forklift has been largely adopted wide view mast, lifting hydraulic cylinders are placed in the middle instead placed on both sides. Placement of hydraulic cylinders, there are two: one is the hydraulic cylinder located behind the door frame; another hydraulic cylinder is measured outside of the door frame. Mast is generally divided into standard, two or three type type. Domestic forklift lifting height is generally between 2 ~ 5m and 3m and 3m to the following of the majority, and foreign electric forklift lifting height is generally between 2 ~ 6m, because a high degree of three-dimensional warehouse, thus lifting height of 3m above, electric forklifts are much higher than domestic demand.

the battery discharge capacity and discharge time

How to configure battery electric vehicles
 Electric rail flat car, there is a series of battery-powered electric vehicles, which is based batteries for power, through battery power to drive the DC motor, via the DC controller to control the motor, speed control with reverse and stopped.
Since there are batteries, you should select the appropriate DC battery operation, we must first electrics tacker the battery usage time, namely: the battery discharge capacity and discharge time, it is extremely important; secondly to consider to consider the different rail flat car battery discharge charging characteristics and the depth of the various characteristics of different temperatures; final consideration to rail car battery cycle life characteristics and workability of maintenance and so on.

the vehicle first charge should be a continuous charge 18 hours. Battery unused for long periods, they should be stored fully charged and recharged once every 15 days. If the battery is charging, the battery is hot and does not turn green, it is timely to professional service points on the battery and charger detection and repair.

Extend the battery life of a fully charged car battery do

  Electric stacker car battery is the energy carrier is the impact on the performance of key components of electric vehicles. To maintain the electric car can ride farther, then in everyday life you need to have to protect the battery consciousness.

Therefore, the use of electric vehicle batteries when the attention of the following five points:

1, in the process of moving the dashboard indicates undervoltage red, indicating that the battery into the starvation zone, should be promptly charged, the charging time can greatly extend battery life, allow the battery to stay in a fully charged state, its longevity has great benefits. Otherwise it will greatly affect battery life, severe cases can cause the battery to early retirement.

2, the vehicle first charge should be a continuous charge 18 hours. Battery unused for long periods, they should be stored fully charged and recharged once every 15 days. If the battery is charging, the battery is hot and does not turn green, it is timely to professional service points on the battery and charger detection and repair.

3, the charger of the important technical indicators should be consistent with the battery life, do not use too much or too little current does not meet the requirements of the charger.

4, the Chargers do not know good or bad, but the basic can be charged in the case, the best replacement charger, battery ban over-charging, and over-discharge. Be careful not to in the course of a long, high-current discharge (such as electric bicycles manned climbing, overload operation).

5, the battery in the winter, the steam temperature is lower than 15C °, or less, the output capacity will be decreased with the temperature drop, drop riding mileage will normally shortened.

Expert analysis flatbed trailer industry for nearly two years of data changes

 On Thursday, the flatbed trailer manufacturer's report shows that the market demand for flatbed trailer, and the role of the engineering market has been completely eroded beyond the original expectations. 2012 and 2013 trailer shipments growth is likely to shrink to 1%, the estimated current and future growth are 2% and 5%. Dongfeng market research company in 2012 and 2013 growth expectations were 5% and 9.5%.
Analysis flatbed trailer manufacturers expect market growth will electric pallet trucks flatbed trailer previously expected in 2012 and 2013 trailer shipments will reach 1000-3000 units, respectively, compared with the previous forecast of 10% and 20% increase. Experts also pointed out that in the new flatbed trailer shipments, 15% will replace or postpone the purchase of trailer demand than previously expected growth of 8%.
     In addition to accelerating growth in demand for flatbed trailers, dump trailers, is also expected to release the existing demand for the liberation of flatbed trailer had an impact. Because of the large retailers is unlikely before the release of hoarding too much inventory system, the next two months trailer shipments growth will slow, it will rebound by the end of 2012

Electric flat car production delivery process

Electric pallet truck flat car production process is as follows (according to supply and demand sides of the contract stipulated delivery time calculation):
1, technical preparation, feeding.
2, for cutting, welding, steel fabrication and machining parts production, heat treatment, finishing.
3 for steel assembly, electrical and other operational agencies and assembly and assembly.
4, the electric flatbed for debugging, inspection, commissioning and performance data for the relevant tests required to complete the tender side of the various technical documents. If the customer requires the scene detection, timely
Inform and invite customers to come to inspect.
5, the equipment for paints, packaging, packing, and shipping transport determined, programs, prepare prior to shipment preparations.
6, the dispatch of the goods to the demand side, the construction site.