Small lift safety rules introduced

 1, the platform should be carefully checked before using the hydraulic, electrical systems, no leakage or bare drain phenomenon before use.
 2, the lift is in use, the four legs to be firmly supported on solid ground sleepers may be used when necessary.
3, or lift an empty run 1-3 times electrics tacker loading operations.
 4, the load's center of gravity should be at the center of the table.
 5, protective railings doors should be closed at both ends firmly locked activities before operation.
6, lifting platforms have been tested at the factory prior to commissioning, the technical indicators meet the design requirements, use only power, hydraulic and electrical systems without adjustment.
 7, using a manual pump, the first oil return valve knob clockwise to tighten the handle to the neutral position, the pressure can lift the handle platform. Down, loosen the oil return valve platforms declined.
8, the use, the oil return valve knob clockwise to tighten down the manual valve lever neutral position, make the system work to start the motor, and the reversing lever pulled up from the position of the lifting platform, reach the desired height of the handle and then push the commutation to the neutral position, lifting platform stops rising, while off the motor, you can work. Down, loosen the oil return valve platform can own weight down.