Preparation before forklift operation

1, the preparation before forklift operation
(1) should be checked before driving whether the water to fill the radiator.
(2) whether the oil level in the engine oil dipstick scale range.
(3) the adequacy of the fuel tank of fuel.
(4) The pipe fittings, pipe joints for leaks.
(5) Check the clutch pedal and foot brake pedal free travel is normal, the brakes are flexible and reliable.
(6) Check the system piping and connectors for damage, loose and oil spills, leaks, leaks and other phenomena.
(7) Check all electrical connectors, wiring, lighting is intact and solid, electrical equipment and signal are normal.
(8) and specific gravity of the battery fluid level check for compliance.
(9) the generator is charging.
(10) before and after the tire pressure to meet the requirements to remove embedded in the tread between the stones and folders and the like.
(11) Check the fastening bolts and nuts without loosening.
2, driving before the electric stacker starts idling about 5min, electric forklifts, until the water temperature rises above 60 ℃ side allows full load operation; empty running, you should check whether the meter readings compliance requirements, or to be repair. Before driving response carefully check brake system must be sensitive and reliable, or be adjusted.
3, forklift operation
(1) Start with a slow file.
(2) after the start should first test brakes and steering is good.
(3) Driving speed clutch pedal first, and then transform lever position.
(4) Forklift need to change the direction of travel, you should make after a parked truck before proceeding.
(5) down a steep hill, you should use the "slow" speed stalls, while intermittent brake pedal.
(6) uphill run, they must be transferred in a "slow" speed file with; turn, should slow down in advance.
(7) does not allow separation clutch coasting, does not allow the moving foot on the clutch pedal, the clutch, the separation must quickly combined to stable.